Bug: Wi-Fi config page and Touch menu not working on Waveshare 4.3" (non-B) - V2.0.3.2 Beta

[duende74]

Hi Greg, thank you for adding support for the new Waveshare 4.3" (not B).
I just flashed the V2.0.3.2 Beta using your Web Flasher (with "Erase device" checked). The flashing process goes well and the main Amp GUI loads perfectly on the screen.
Here is the issue I'm facing:
Wi-Fi Config Page is unresponsive:
The TonexConfig Wi-Fi network appears and connects. But when trying to reach http://192.168.4.1, the browser just times out or shows a blank page. I tested this both from a smartphone (with mobile data turned off) and from a PC connected to the AP.
Hardware: Waveshare ESP32-S3 Touch LCD 4.3 (the one with two USB-C ports, not the B version).
Firmware: V2.0.3.2 Beta
Is there a known workaround, or is this a bug in this specific Beta build? I am available to test any new fixes if needed. Thanks for your great work!

[Builty]

Hi. Did you load the special firmware for this version? not the 4.3B one, but the Waveshare 7/4.3 version?

[duende74]

Thank you for your help Greg.

I used the web installer, selecting V2.0.3.2 beta 2, Waveshare 7" and 4.3" (not B).
I tried to use V2.0.2.2, but it said "can't download manifest" or something similar.

[Builty]

Yes V2.0.2.2 didnt have the needed files.
Some uesers have had issues with phones detecting that the controller access point has no internet access, and disconnecting back to a known network. Some have used forgetting known networks.
On Android/Samsung at least, you can wait a few seconds and it asks you to confirm if you wish to remain connected or not.