Synced up this morning and build_all fails #296
Description
I synced up to the latest stuff.
Did a west update
followed by: .\extras\build_all.sh
And the building of the nano_matter fails.
Loading Zephyr default modules (Zephyr base (cached)).
-- Application: /home/kurte/git/ArduinoCore-zephyr/loader
-- CMake version: 3.28.3
-- Zephyr version: 4.2.0 (/home/kurte/git/zephyr)
-- Found west (found suitable version "1.3.0", minimum required is "0.14.0")
-- Found host-tools: zephyr 0.16.8 (/home/kurte/Downloads/zephyr-sdk-0.16.8)
-- Found toolchain: zephyr 0.16.8 (/home/kurte/Downloads/zephyr-sdk-0.16.8)
-- Found Dtc: /home/kurte/Downloads/zephyr-sdk-0.16.8/sysroots/x86_64-pokysdk-linux/usr/bin/dtc (found suitable version "1.6.0", minimum required is "1.4.6")
-- Found BOARD.dts: /home/kurte/git/zephyr/boards/arduino/nano_matter/arduino_nano_matter.dts
-- Found devicetree overlay: /home/kurte/git/ArduinoCore-zephyr/loader/../variants/arduino_nano_matter_mgm240sd22vna/arduino_nano_matter_mgm240sd22vna.overlay
-- Generated zephyr.dts: /home/kurte/git/ArduinoCore-zephyr/build/arduino_nano_matter_mgm240sd22vna/zephyr/zephyr.dts
-- Generated pickled edt: /home/kurte/git/ArduinoCore-zephyr/build/arduino_nano_matter_mgm240sd22vna/zephyr/edt.pickle
-- Generated devicetree_generated.h: /home/kurte/git/ArduinoCore-zephyr/build/arduino_nano_matter_mgm240sd22vna/zephyr/include/generated/zephyr/devicetree_generated.h
warning: BT_SILABS_EFR32_HCI_VS (defined at drivers/bluetooth/hci/Kconfig.silabs:7) was assigned the
value 'y' but got the value 'n'. Check these unsatisfied dependencies: BT_SILABS_EFR32 (=n). See
http://docs.zephyrproject.org/latest/kconfig.html#CONFIG_BT_SILABS_EFR32_HCI_VS and/or look up
BT_SILABS_EFR32_HCI_VS in the menuconfig/guiconfig interface. The Application Development Primer,
Setting Configuration Values, and Kconfig - Tips and Best Practices sections of the manual might be
helpful too.
warning: BT_SILABS_EFR32_LINK_LAYER_STACK_SIZE (defined at drivers/bluetooth/hci/Kconfig.silabs:49)
was assigned the value '4096' but got the value ''. Check these unsatisfied dependencies:
BT_SILABS_EFR32 (=n). See
http://docs.zephyrproject.org/latest/kconfig.html#CONFIG_BT_SILABS_EFR32_LINK_LAYER_STACK_SIZE
and/or look up BT_SILABS_EFR32_LINK_LAYER_STACK_SIZE in the menuconfig/guiconfig interface. The
Application Development Primer, Setting Configuration Values, and Kconfig - Tips and Best Practices
sections of the manual might be helpful too.
warning: INPUT_THREAD_PRIORITY_OVERRIDE (defined at subsys/input/Kconfig:42) was assigned the value
'y' but got the value 'n'. Check these unsatisfied dependencies: INPUT_MODE_THREAD (=n), INPUT (=n).
See http://docs.zephyrproject.org/latest/kconfig.html#CONFIG_INPUT_THREAD_PRIORITY_OVERRIDE and/or
look up INPUT_THREAD_PRIORITY_OVERRIDE in the menuconfig/guiconfig interface. The Application
Development Primer, Setting Configuration Values, and Kconfig - Tips and Best Practices sections of
the manual might be helpful too.
warning: INPUT_THREAD_PRIORITY (defined at subsys/input/Kconfig:48) was assigned the value '0' but
got the value ''. Check these unsatisfied dependencies: INPUT_THREAD_PRIORITY_OVERRIDE (=n),
INPUT_MODE_THREAD (=n), INPUT (=n). See
http://docs.zephyrproject.org/latest/kconfig.html#CONFIG_INPUT_THREAD_PRIORITY and/or look up
INPUT_THREAD_PRIORITY in the menuconfig/guiconfig interface. The Application Development Primer,
Setting Configuration Values, and Kconfig - Tips and Best Practices sections of the manual might be
helpful too.
warning: HAS_SILABS_SISDK (defined at modules/hal_silabs/Kconfig:17) has direct dependencies SOC_FAMILY_SILABS_S2 && 0 with value n, but is currently being y-selected by the following symbols:
- SOC_SERIES_MGM24 (defined at soc/silabs/silabs_s2/xg24/Kconfig.soc:17, soc/silabs/silabs_s2/xg24/Kconfig:24), with value y, direct dependencies y (value: y), and select condition SOC_FAMILY_SILABS_S2 (value: y)
warning: SILABS_SISDK_TIMER (defined at modules/hal_silabs/simplicity_sdk/Kconfig:10) has direct dependencies HAS_SILABS_SISDK && 0 with value n, but is currently being y-selected by the following symbols:
- PWM_SILABS_TIMER (defined at drivers/pwm/Kconfig.silabs:16), with value y, direct dependencies DT_HAS_SILABS_TIMER_PWM_ENABLED && PWM (value: y), and select condition DT_HAS_SILABS_TIMER_PWM_ENABLED && PWM (value: y)
Parsing /home/kurte/git/zephyr/Kconfig
Loaded configuration '/home/kurte/git/zephyr/boards/arduino/nano_matter/arduino_nano_matter_defconfig'
Merged configuration '/home/kurte/git/ArduinoCore-zephyr/loader/prj.conf'
Merged configuration '/home/kurte/git/ArduinoCore-zephyr/loader/../variants/arduino_nano_matter_mgm240sd22vna/arduino_nano_matter_mgm240sd22vna.conf'
error: Aborting due to Kconfig warnings
CMake Error at /home/kurte/git/zephyr/cmake/modules/kconfig.cmake:389 (message):
command failed with return code: 1
Call Stack (most recent call first):
/home/kurte/git/zephyr/cmake/modules/zephyr_default.cmake:131 (include)
/home/kurte/git/zephyr/share/zephyr-package/cmake/ZephyrConfig.cmake:66 (include)
/home/kurte/git/zephyr/share/zephyr-package/cmake/ZephyrConfig.cmake:97 (include_boilerplate)
CMakeLists.txt:13 (find_package)
-- Configuring incomplete, errors occurred!
FATAL ERROR: command exited with status 1: /usr/bin/cmake -DWEST_PYTHON=/home/kurte/git/ArduinoCore-zephyr/venv/bin/python3 -B/home/kurte/git/ArduinoCore-zephyr/build/arduino_nano_matter_mgm240sd22vna -GNinja -DBOARD=arduino_nano_matter -S/home/kurte/git/ArduinoCore-zephyr/loader
arduino_nano_matter_mgm240sd22vna result: 1