|
| 1 | +--- |
| 2 | +title: Reviung34 Build Guide |
| 3 | +description: How to put together your new Reviung34 solderable kit. |
| 4 | +author: Boardsource |
| 5 | +product_link: https://boardsource.xyz/store/5f2ef1b52bf5e8714a60f613 |
| 6 | +subcategory: medium |
| 7 | +draft: false |
| 8 | +tags: |
| 9 | +- 30% |
| 10 | +- ergo |
| 11 | +- kit |
| 12 | +banner: https://i.imgur.com/cXcIuV6.jpg |
| 13 | +thumbnail: https://i.imgur.com/cXcIuV6.jpg |
| 14 | +--- |
| 15 | +### This guide is for *KEYBOARDNAME* PCBs. |
| 16 | +https://i.imgur.com/GFpmPNH.jpg |
| 17 | +# Parts |
| 18 | +### Required |
| 19 | +| Item | Count | |
| 20 | +|------|-------| |
| 21 | +| SMT Diodes | 33-34 | |
| 22 | +| PCB | PCBCOUNT | |
| 23 | +| Pro micro stlye or similar microcontroller | Blok | |
| 24 | +| Reset Switch | 1 | |
| 25 | +| SOCKETSTYLE Hotswap Sockets | 33-34 | |
| 26 | +| SWITCHSTYLE Switches | 33-34 | |
| 27 | +| *KEYCAPSTYLE* Keycaps | 33-34 | |
| 28 | + |
| 29 | +### Optional |
| 30 | +| Item | Count | |
| 31 | +|------|-------| |
| 32 | +| WS2812B LED | 8 | |
| 33 | + |
| 34 | + |
| 35 | + |
| 36 | +# Soldering |
| 37 | +## Diodes |
| 38 | +**Orientation**: Black bar facing downwards or towards the footprint indicator. |
| 39 | +1. Solder one pad. |
| 40 | + |
| 41 | +2. While holding diode with tweezers, reflow solder and place diode down on pad. |
| 42 | + |
| 43 | +3. Solder other pad. |
| 44 | + |
| 45 | +- Note, when working with [MELF](https://en.wikipedia.org/wiki/Metal_electrode_leadless_face) package diodes, |
| 46 | +you may need to reflow and add more solder a couple times before an adequate connection is made. |
| 47 | + |
| 48 | +## LEDs |
| 49 | +**Orientation**: Notched corner/pin facing the pad marked with rectangle. This applies for both SK6812 Mini-E & WS2812B LEDs. |
| 50 | + |
| 51 | + |
| 52 | +- Notes: \ |
| 53 | +\- This component is heat sensitive. Be cautious and work at a safe temp (~300c). \ |
| 54 | +\- It is wise to test the LEDs as you solder then. Consider [soldering your controllers beforehand](#microcontrollers). \ |
| 55 | +\- The LED order is somewhat outlined  and should be followed in order when building. |
| 56 | +1. Solder one pad. (it may be easier to solder all 4 pads before placing LED down when installing WS2812B LEDs) |
| 57 | + |
| 58 | + |
| 59 | +2. While holding LED with tweezers, reflow solder and place LED down on pad. |
| 60 | + |
| 61 | + |
| 62 | +3. Solder remaining pads. |
| 63 | + |
| 64 | + |
| 65 | +## Hotswap sockets |
| 66 | +1. Solder one pad. |
| 67 | + |
| 68 | +2. While holding hotswap socket (fingers are fine), reflow solder and place socket down on pad. |
| 69 | + |
| 70 | +3. Solder other pad. |
| 71 | + |
| 72 | +- Note, don't hesitate to use a little extra solder, as that will help secure the socket and prevent it from being ripped off. |
| 73 | + |
| 74 | +## Microcontrollers |
| 75 | +**Orientation**: Both microcontrollers CONTROLLERPLACEMENT. |
| 76 | +- Note, it is recommended to flash each microcontroller prior to soldering. See [firmware](#firmware) section for more. |
| 77 | +1. Insert headers from front, solder in from the back. |
| 78 | + |
| 79 | +2. Place microcontroller CONTROLLERPLACEMENT. |
| 80 | + |
| 81 | +3. Apply solder to all pins. |
| 82 | +4. Use flush cutters or similar to trim excess from pins on each side. |
| 83 | + |
| 84 | + |
| 85 | +### Reset switches |
| 86 | +1. Solder one pad. |
| 87 | + |
| 88 | +2. While holding switch with tweezers, reflow solder and place switch down on pad. |
| 89 | +3. Solder remaining pads. |
| 90 | + |
| 91 | + |
| 92 | + |
| 93 | + |
| 94 | +## Firmware |
| 95 | + |
| 96 | +### QMK |
| 97 | +In qmk this keyboard can be found under QMKKEYBOARDNAME. |
| 98 | +To begin, follow the [QMK setup guide](https://docs.qmk.fm/#/newbs_getting_started). (if working from an existing installation, an [update](https://docs.qmk.fm/#/newbs_git_using_your_master_branch?id=updating-your-master-branch) may be needed.) \ |
| 99 | +For flashing instructions, see [doc](https://docs.qmk.fm/#/newbs_flashing) or [video](https://www.youtube.com/watch?v=fuBJbdCFF0Q) |
| 100 | + |
| 101 | +### KMK / PEG |
| 102 | +In Peg or KMK this keyboard can be found under KMKKEYBOARDNAME |
| 103 | + |
| 104 | +Peg can be downloaded [here](https://peg.software/), and the quick start can be seen [here](https://peg.software/docs/Peg_Client/#quick-start-and-testing). |
| 105 | + |
| 106 | +For Kmk can be downloaded [here](https://github.com/KMKfw/kmk_firmware) and the quick start can be seen [here](http://kmkfw.io/docs/Getting_Started#tldr-quick-start-guide) |
| 107 | + |
| 108 | + |
| 109 | + |
| 110 | +## Extra |
| 111 | +For questions, ask in [Boardsource Discord server](https://discord.gg/5qpqbgaTYz) |
0 commit comments