guide on the mx pcb fix

Author: daysgobye

guides/unicorne_mx_fix.md

@@ -0,0 +1,42 @@
+---
+title: Unicorne mx joystick fix
+description: how to fix a broken Unicorne mx joystick
+author: Boardsource
+product_link: https://www.boardsource.xyz/products/unicorne
+subcategory: Hard
+draft: true
+
+---
+
+# Unicorne MX Joystick Fix
+
+There are two fixes for the Unicorne MX Joystick.
+
+## Easy way 
+
+On the back of the PCB you will see something like this:
+
+![Unicorne MX](https://images.boardsource.xyz/easy.jpg)
+
+all you need to do is solder a wire between the 2 pads marked.
+
+This is quite easy the 2 pads are big and you just need to jump the 2 pads.
+
+
+## Hard way
+
+
+With the easy way you will have a wire on the back of your PCB. 
+
+With the hard way you dont need a wire but its harder. 
+
+On the top of of the PCB you will see a VIA on the top of the PCB next to the boot switch. I have marked it in red. 
+
+Next to that via you need to scrape off the silk screen to reveal copper.
+Next just us that as a jumper and jump it with solder.
+
+You can see the jump marked in green.  
+
+![Unicorne MX](https://images.boardsource.xyz/hard.jpg)
+
+