fix: Lulu ancient files need to go

Author: kdb424

guides/lulu_flashing.md

@@ -30,8 +30,8 @@ While using Peg, you do not need to use the Boot switch or Reset switch. If for
 
 The files below come with everything you need, BS-Python (CircuitPython Fork), KMK, all required libs, and the default lulu keymap.
 
-* [Left uf2](https://drive.google.com/file/d/1e3nr5HeoZHaRjcZNLs5dhfeo9tDG6pe-/view?usp=sharing)
-* [Right uf2](https://drive.google.com/file/d/1OS4KthC84QQx49tYhefWclNaoeoOH0vS/view?usp=sharing)
+* [Recent](https://github.com/boardsource/bs-python/releases/download/v1.9.2/boardsouce_lulu_full.uf2)
+* [Latest](https://github.com/boardsource/bs-python/releases)
 
 ## Flashing With VIA
 
@@ -61,4 +61,4 @@ After a few moments, your PCB should appear as a Drive on your computer named  "
 
 With the Drive "RPI-RP2" located on your computer AND the Switch reset to it’s Default position you can drag and drop the Uf2 files onto the drive (onto the PCB). When it is done transferring the file, your PCB will reboot. Because you put the switch back to it’s Default position, when the board restarts it will no longer be in Boot mode and will be good to go. 
 
-If you’ve successfully transferred the Uf2 file, you should see the LEDs turn back on, and a new ‘LULU’ drive mount to your computer. If the transfer fails for any reason, simply repeat the steps, starting back from the beginning with the PCB unplugged from your computer.v
+If you’ve successfully transferred the Uf2 file, you should see the LEDs turn back on, and a new ‘LULU’ drive mount to your computer. If the transfer fails for any reason, simply repeat the steps, starting back from the beginning with the PCB unplugged from your computer.v