feat(matter): adds necessary Arduino IDE options to all README files

SuGlider · SuGlider · commit 87955b7f4a6b · 2025-12-14T17:25:32.000-03:00
diff --git a/libraries/Matter/examples/MatterColorLight/README.md b/libraries/Matter/examples/MatterColorLight/README.md
@@ -78,8 +78,10 @@ Before uploading the sketch, configure the following:
 
 1.  Open the `MatterColorLight.ino` sketch in the Arduino IDE.
 2.  Select your ESP32 board from the **Tools > Board** menu.
-3.  Connect your ESP32 board to your computer via USB.
-4.  Click the **Upload** button to compile and flash the sketch.
+3.  Select **"Huge APP (3MB No OTA/1MB SPIFFS)"** from **Tools > Partition Scheme** menu.
+4.  Enable **"Erase All Flash Before Sketch Upload"** option from **Tools** menu.
+5.  Connect your ESP32 board to your computer via USB.
+6.  Click the **Upload** button to compile and flash the sketch.
 
 ## Expected Output
 
diff --git a/libraries/Matter/examples/MatterCommissionTest/README.md b/libraries/Matter/examples/MatterCommissionTest/README.md
@@ -59,8 +59,10 @@ Before uploading the sketch, configure the following:
 
 1. Open the `MatterCommissionTest.ino` sketch in the Arduino IDE.
 2. Select your ESP32 board from the **Tools > Board** menu.
-3. Connect your ESP32 board to your computer via USB.
-4. Click the **Upload** button to compile and flash the sketch.
+3. Select **"Huge APP (3MB No OTA/1MB SPIFFS)"** from **Tools > Partition Scheme** menu.
+4. Enable **"Erase All Flash Before Sketch Upload"** option from **Tools** menu.
+5. Connect your ESP32 board to your computer via USB.
+6. Click the **Upload** button to compile and flash the sketch.
 
 ## Expected Output
 
diff --git a/libraries/Matter/examples/MatterComposedLights/README.md b/libraries/Matter/examples/MatterComposedLights/README.md
@@ -74,8 +74,10 @@ Before uploading the sketch, configure the following:
 
 1. Open the `MatterComposedLights.ino` sketch in the Arduino IDE.
 2. Select your ESP32 board from the **Tools > Board** menu.
-3. Connect your ESP32 board to your computer via USB.
-4. Click the **Upload** button to compile and flash the sketch.
+3. Select **"Huge APP (3MB No OTA/1MB SPIFFS)"** from **Tools > Partition Scheme** menu.
+4. Enable **"Erase All Flash Before Sketch Upload"** option from **Tools** menu.
+5. Connect your ESP32 board to your computer via USB.
+6. Click the **Upload** button to compile and flash the sketch.
 
 ## Expected Output
 
diff --git a/libraries/Matter/examples/MatterContactSensor/README.md b/libraries/Matter/examples/MatterContactSensor/README.md
@@ -78,8 +78,10 @@ Before uploading the sketch, configure the following:
 
 1. Open the `MatterContactSensor.ino` sketch in the Arduino IDE.
 2. Select your ESP32 board from the **Tools > Board** menu.
-3. Connect your ESP32 board to your computer via USB.
-4. Click the **Upload** button to compile and flash the sketch.
+3. Select **"Huge APP (3MB No OTA/1MB SPIFFS)"** from **Tools > Partition Scheme** menu.
+4. Enable **"Erase All Flash Before Sketch Upload"** option from **Tools** menu.
+5. Connect your ESP32 board to your computer via USB.
+6. Click the **Upload** button to compile and flash the sketch.
 
 ## Expected Output
 
diff --git a/libraries/Matter/examples/MatterDimmableLight/README.md b/libraries/Matter/examples/MatterDimmableLight/README.md
@@ -79,8 +79,10 @@ Before uploading the sketch, configure the following:
 
 1. Open the `MatterDimmableLight.ino` sketch in the Arduino IDE.
 2. Select your ESP32 board from the **Tools > Board** menu.
-3. Connect your ESP32 board to your computer via USB.
-4. Click the **Upload** button to compile and flash the sketch.
+3. Select **"Huge APP (3MB No OTA/1MB SPIFFS)"** from **Tools > Partition Scheme** menu.
+4. Enable **"Erase All Flash Before Sketch Upload"** option from **Tools** menu.
+5. Connect your ESP32 board to your computer via USB.
+6. Click the **Upload** button to compile and flash the sketch.
 
 ## Expected Output
 
diff --git a/libraries/Matter/examples/MatterDimmablePlugin/README.md b/libraries/Matter/examples/MatterDimmablePlugin/README.md
@@ -82,8 +82,10 @@ Before uploading the sketch, configure the following:
 
 1. Open the `MatterDimmablePlugin.ino` sketch in the Arduino IDE.
 2. Select your ESP32 board from the **Tools > Board** menu.
-3. Connect your ESP32 board to your computer via USB.
-4. Click the **Upload** button to compile and flash the sketch.
+3. Select **"Huge APP (3MB No OTA/1MB SPIFFS)"** from **Tools > Partition Scheme** menu.
+4. Enable **"Erase All Flash Before Sketch Upload"** option from **Tools** menu.
+5. Connect your ESP32 board to your computer via USB.
+6. Click the **Upload** button to compile and flash the sketch.
 
 ## Expected Output
 
diff --git a/libraries/Matter/examples/MatterEnhancedColorLight/README.md b/libraries/Matter/examples/MatterEnhancedColorLight/README.md
@@ -81,8 +81,10 @@ Before uploading the sketch, configure the following:
 
 1. Open the `MatterEnhancedColorLight.ino` sketch in the Arduino IDE.
 2. Select your ESP32 board from the **Tools > Board** menu.
-3. Connect your ESP32 board to your computer via USB.
-4. Click the **Upload** button to compile and flash the sketch.
+3. Select **"Huge APP (3MB No OTA/1MB SPIFFS)"** from **Tools > Partition Scheme** menu.
+4. Enable **"Erase All Flash Before Sketch Upload"** option from **Tools** menu.
+5. Connect your ESP32 board to your computer via USB.
+6. Click the **Upload** button to compile and flash the sketch.
 
 ## Expected Output
 
diff --git a/libraries/Matter/examples/MatterEvents/README.md b/libraries/Matter/examples/MatterEvents/README.md
@@ -62,8 +62,10 @@ Before uploading the sketch, configure the following:
 
 1. Open the `MatterEvents.ino` sketch in the Arduino IDE.
 2. Select your ESP32 board from the **Tools > Board** menu.
-3. Connect your ESP32 board to your computer via USB.
-4. Click the **Upload** button to compile and flash the sketch.
+3. Select **"Huge APP (3MB No OTA/1MB SPIFFS)"** from **Tools > Partition Scheme** menu.
+4. Enable **"Erase All Flash Before Sketch Upload"** option from **Tools** menu.
+5. Connect your ESP32 board to your computer via USB.
+6. Click the **Upload** button to compile and flash the sketch.
 
 ## Expected Output
 
diff --git a/libraries/Matter/examples/MatterFan/README.md b/libraries/Matter/examples/MatterFan/README.md
@@ -89,8 +89,10 @@ Before uploading the sketch, configure the following:
 
 1. Open the `MatterFan.ino` sketch in the Arduino IDE.
 2. Select your ESP32 board from the **Tools > Board** menu.
-3. Connect your ESP32 board to your computer via USB.
-4. Click the **Upload** button to compile and flash the sketch.
+3. Select **"Huge APP (3MB No OTA/1MB SPIFFS)"** from **Tools > Partition Scheme** menu.
+4. Enable **"Erase All Flash Before Sketch Upload"** option from **Tools** menu.
+5. Connect your ESP32 board to your computer via USB.
+6. Click the **Upload** button to compile and flash the sketch.
 
 ## Expected Output
 
diff --git a/libraries/Matter/examples/MatterHumiditySensor/README.md b/libraries/Matter/examples/MatterHumiditySensor/README.md
@@ -76,8 +76,10 @@ Before uploading the sketch, configure the following:
 
 1. Open the `MatterHumiditySensor.ino` sketch in the Arduino IDE.
 2. Select your ESP32 board from the **Tools > Board** menu.
-3. Connect your ESP32 board to your computer via USB.
-4. Click the **Upload** button to compile and flash the sketch.
+3. Select **"Huge APP (3MB No OTA/1MB SPIFFS)"** from **Tools > Partition Scheme** menu.
+4. Enable **"Erase All Flash Before Sketch Upload"** option from **Tools** menu.
+5. Connect your ESP32 board to your computer via USB.
+6. Click the **Upload** button to compile and flash the sketch.
 
 ## Expected Output
 
diff --git a/libraries/Matter/examples/MatterLambdaSingleCallbackManyEPs/README.md b/libraries/Matter/examples/MatterLambdaSingleCallbackManyEPs/README.md
@@ -98,8 +98,10 @@ Before uploading the sketch, configure the following:
 
 1. Open the `MatterLambdaSingleCallbackManyEPs.ino` sketch in the Arduino IDE.
 2. Select your ESP32 board from the **Tools > Board** menu.
-3. Connect your ESP32 board to your computer via USB.
-4. Click the **Upload** button to compile and flash the sketch.
+3. Select **"Huge APP (3MB No OTA/1MB SPIFFS)"** from **Tools > Partition Scheme** menu.
+4. Enable **"Erase All Flash Before Sketch Upload"** option from **Tools** menu.
+5. Connect your ESP32 board to your computer via USB.
+6. Click the **Upload** button to compile and flash the sketch.
 
 ## Expected Output
 
diff --git a/libraries/Matter/examples/MatterMinimum/README.md b/libraries/Matter/examples/MatterMinimum/README.md
@@ -78,8 +78,10 @@ Before uploading the sketch, configure the following:
 
 1. Open the `MatterMinimum.ino` sketch in the Arduino IDE.
 2. Select your ESP32 board from the **Tools > Board** menu.
-3. Connect your ESP32 board to your computer via USB.
-4. Click the **Upload** button to compile and flash the sketch.
+3. Select **"Huge APP (3MB No OTA/1MB SPIFFS)"** from **Tools > Partition Scheme** menu.
+4. Enable **"Erase All Flash Before Sketch Upload"** option from **Tools** menu.
+5. Connect your ESP32 board to your computer via USB.
+6. Click the **Upload** button to compile and flash the sketch.
 
 ## Expected Output
 
diff --git a/libraries/Matter/examples/MatterOccupancySensor/README.md b/libraries/Matter/examples/MatterOccupancySensor/README.md
@@ -79,8 +79,10 @@ Before uploading the sketch, configure the following:
 
 1. Open the `MatterOccupancySensor.ino` sketch in the Arduino IDE.
 2. Select your ESP32 board from the **Tools > Board** menu.
-3. Connect your ESP32 board to your computer via USB.
-4. Click the **Upload** button to compile and flash the sketch.
+3. Select **"Huge APP (3MB No OTA/1MB SPIFFS)"** from **Tools > Partition Scheme** menu.
+4. Enable **"Erase All Flash Before Sketch Upload"** option from **Tools** menu.
+5. Connect your ESP32 board to your computer via USB.
+6. Click the **Upload** button to compile and flash the sketch.
 
 ## Expected Output
 
diff --git a/libraries/Matter/examples/MatterOnIdentify/README.md b/libraries/Matter/examples/MatterOnIdentify/README.md
@@ -79,8 +79,10 @@ Before uploading the sketch, configure the following:
 
 1. Open the `MatterOnIdentify.ino` sketch in the Arduino IDE.
 2. Select your ESP32 board from the **Tools > Board** menu.
-3. Connect your ESP32 board to your computer via USB.
-4. Click the **Upload** button to compile and flash the sketch.
+3. Select **"Huge APP (3MB No OTA/1MB SPIFFS)"** from **Tools > Partition Scheme** menu.
+4. Enable **"Erase All Flash Before Sketch Upload"** option from **Tools** menu.
+5. Connect your ESP32 board to your computer via USB.
+6. Click the **Upload** button to compile and flash the sketch.
 
 ## Expected Output
 
diff --git a/libraries/Matter/examples/MatterOnOffLight/README.md b/libraries/Matter/examples/MatterOnOffLight/README.md
@@ -79,8 +79,10 @@ Before uploading the sketch, configure the following:
 
 1. Open the `MatterOnOffLight.ino` sketch in the Arduino IDE.
 2. Select your ESP32 board from the **Tools > Board** menu.
-3. Connect your ESP32 board to your computer via USB.
-4. Click the **Upload** button to compile and flash the sketch.
+3. Select **"Huge APP (3MB No OTA/1MB SPIFFS)"** from **Tools > Partition Scheme** menu.
+4. Enable **"Erase All Flash Before Sketch Upload"** option from **Tools** menu.
+5. Connect your ESP32 board to your computer via USB.
+6. Click the **Upload** button to compile and flash the sketch.
 
 ## Expected Output
 
diff --git a/libraries/Matter/examples/MatterOnOffPlugin/README.md b/libraries/Matter/examples/MatterOnOffPlugin/README.md
@@ -80,8 +80,10 @@ Before uploading the sketch, configure the following:
 
 1. Open the `MatterOnOffPlugin.ino` sketch in the Arduino IDE.
 2. Select your ESP32 board from the **Tools > Board** menu.
-3. Connect your ESP32 board to your computer via USB.
-4. Click the **Upload** button to compile and flash the sketch.
+3. Select **"Huge APP (3MB No OTA/1MB SPIFFS)"** from **Tools > Partition Scheme** menu.
+4. Enable **"Erase All Flash Before Sketch Upload"** option from **Tools** menu.
+5. Connect your ESP32 board to your computer via USB.
+6. Click the **Upload** button to compile and flash the sketch.
 
 ## Expected Output
 
diff --git a/libraries/Matter/examples/MatterPressureSensor/README.md b/libraries/Matter/examples/MatterPressureSensor/README.md
@@ -76,8 +76,10 @@ Before uploading the sketch, configure the following:
 
 1. Open the `MatterPressureSensor.ino` sketch in the Arduino IDE.
 2. Select your ESP32 board from the **Tools > Board** menu.
-3. Connect your ESP32 board to your computer via USB.
-4. Click the **Upload** button to compile and flash the sketch.
+3. Select **"Huge APP (3MB No OTA/1MB SPIFFS)"** from **Tools > Partition Scheme** menu.
+4. Enable **"Erase All Flash Before Sketch Upload"** option from **Tools** menu.
+5. Connect your ESP32 board to your computer via USB.
+6. Click the **Upload** button to compile and flash the sketch.
 
 ## Expected Output
 
diff --git a/libraries/Matter/examples/MatterRainSensor/README.md b/libraries/Matter/examples/MatterRainSensor/README.md
@@ -78,8 +78,10 @@ Before uploading the sketch, configure the following:
 
 1. Open the `MatterRainSensor.ino` sketch in the Arduino IDE.
 2. Select your ESP32 board from the **Tools > Board** menu.
-3. Connect your ESP32 board to your computer via USB.
-4. Click the **Upload** button to compile and flash the sketch.
+3. Select **"Huge APP (3MB No OTA/1MB SPIFFS)"** from **Tools > Partition Scheme** menu.
+4. Enable **"Erase All Flash Before Sketch Upload"** option from **Tools** menu.
+5. Connect your ESP32 board to your computer via USB.
+6. Click the **Upload** button to compile and flash the sketch.
 
 ## Expected Output
 
diff --git a/libraries/Matter/examples/MatterSimpleWidowsBlind/README.md b/libraries/Matter/examples/MatterSimpleWidowsBlind/README.md
@@ -53,6 +53,15 @@ Before uploading the sketch, configure the following:
    const char *password = "your-password";
    ```
 
+## Building and Flashing
+
+1. Open the `MatterSimpleWidowsBlind.ino` sketch in the Arduino IDE.
+2. Select your ESP32 board from the **Tools > Board** menu.
+3. Select **"Huge APP (3MB No OTA/1MB SPIFFS)"** from **Tools > Partition Scheme** menu.
+4. Enable **"Erase All Flash Before Sketch Upload"** option from **Tools** menu.
+5. Connect your ESP32 board to your computer via USB.
+6. Click the **Upload** button to compile and flash the sketch.
+
 ## Expected Output
 
 ```
diff --git a/libraries/Matter/examples/MatterSmartButton/README.md b/libraries/Matter/examples/MatterSmartButton/README.md
@@ -71,8 +71,10 @@ Before uploading the sketch, configure the following:
 
 1. Open the `MatterSmartButton.ino` sketch in the Arduino IDE.
 2. Select your ESP32 board from the **Tools > Board** menu.
-3. Connect your ESP32 board to your computer via USB.
-4. Click the **Upload** button to compile and flash the sketch.
+3. Select **"Huge APP (3MB No OTA/1MB SPIFFS)"** from **Tools > Partition Scheme** menu.
+4. Enable **"Erase All Flash Before Sketch Upload"** option from **Tools** menu.
+5. Connect your ESP32 board to your computer via USB.
+6. Click the **Upload** button to compile and flash the sketch.
 
 ## Expected Output
 
diff --git a/libraries/Matter/examples/MatterTemperatureControlledCabinet/README.md b/libraries/Matter/examples/MatterTemperatureControlledCabinet/README.md
@@ -86,8 +86,10 @@ Before uploading the sketch, configure the following:
 
 1. Open the `MatterTemperatureControlledCabinet.ino` sketch in the Arduino IDE.
 2. Select your ESP32 board from the **Tools > Board** menu.
-3. Connect your ESP32 board to your computer via USB.
-4. Click the **Upload** button to compile and flash the sketch.
+3. Select **"Huge APP (3MB No OTA/1MB SPIFFS)"** from **Tools > Partition Scheme** menu.
+4. Enable **"Erase All Flash Before Sketch Upload"** option from **Tools** menu.
+5. Connect your ESP32 board to your computer via USB.
+6. Click the **Upload** button to compile and flash the sketch.
 
 ## Expected Output
 
diff --git a/libraries/Matter/examples/MatterTemperatureControlledCabinetLevels/README.md b/libraries/Matter/examples/MatterTemperatureControlledCabinetLevels/README.md
@@ -87,8 +87,10 @@ Before uploading the sketch, configure the following:
 
 1. Open the `MatterTemperatureControlledCabinetLevels.ino` sketch in the Arduino IDE.
 2. Select your ESP32 board from the **Tools > Board** menu.
-3. Connect your ESP32 board to your computer via USB.
-4. Click the **Upload** button to compile and flash the sketch.
+3. Select **"Huge APP (3MB No OTA/1MB SPIFFS)"** from **Tools > Partition Scheme** menu.
+4. Enable **"Erase All Flash Before Sketch Upload"** option from **Tools** menu.
+5. Connect your ESP32 board to your computer via USB.
+6. Click the **Upload** button to compile and flash the sketch.
 
 ## Expected Output
 
diff --git a/libraries/Matter/examples/MatterTemperatureLight/README.md b/libraries/Matter/examples/MatterTemperatureLight/README.md
@@ -82,8 +82,10 @@ Before uploading the sketch, configure the following:
 
 1. Open the `MatterTemperatureLight.ino` sketch in the Arduino IDE.
 2. Select your ESP32 board from the **Tools > Board** menu.
-3. Connect your ESP32 board to your computer via USB.
-4. Click the **Upload** button to compile and flash the sketch.
+3. Select **"Huge APP (3MB No OTA/1MB SPIFFS)"** from **Tools > Partition Scheme** menu.
+4. Enable **"Erase All Flash Before Sketch Upload"** option from **Tools** menu.
+5. Connect your ESP32 board to your computer via USB.
+6. Click the **Upload** button to compile and flash the sketch.
 
 ## Expected Output
 
diff --git a/libraries/Matter/examples/MatterTemperatureSensor/README.md b/libraries/Matter/examples/MatterTemperatureSensor/README.md
@@ -76,8 +76,10 @@ Before uploading the sketch, configure the following:
 
 1. Open the `MatterTemperatureSensor.ino` sketch in the Arduino IDE.
 2. Select your ESP32 board from the **Tools > Board** menu.
-3. Connect your ESP32 board to your computer via USB.
-4. Click the **Upload** button to compile and flash the sketch.
+3. Select **"Huge APP (3MB No OTA/1MB SPIFFS)"** from **Tools > Partition Scheme** menu.
+4. Enable **"Erase All Flash Before Sketch Upload"** option from **Tools** menu.
+5. Connect your ESP32 board to your computer via USB.
+6. Click the **Upload** button to compile and flash the sketch.
 
 ## Expected Output
 
diff --git a/libraries/Matter/examples/MatterThermostat/README.md b/libraries/Matter/examples/MatterThermostat/README.md
@@ -78,8 +78,10 @@ Before uploading the sketch, configure the following:
 
 1. Open the `MatterThermostat.ino` sketch in the Arduino IDE.
 2. Select your ESP32 board from the **Tools > Board** menu.
-3. Connect your ESP32 board to your computer via USB.
-4. Click the **Upload** button to compile and flash the sketch.
+3. Select **"Huge APP (3MB No OTA/1MB SPIFFS)"** from **Tools > Partition Scheme** menu.
+4. Enable **"Erase All Flash Before Sketch Upload"** option from **Tools** menu.
+5. Connect your ESP32 board to your computer via USB.
+6. Click the **Upload** button to compile and flash the sketch.
 
 ## Expected Output
 
diff --git a/libraries/Matter/examples/MatterWaterFreezeDetector/README.md b/libraries/Matter/examples/MatterWaterFreezeDetector/README.md
@@ -78,8 +78,10 @@ Before uploading the sketch, configure the following:
 
 1. Open the `MatterWaterFreezeDetector.ino` sketch in the Arduino IDE.
 2. Select your ESP32 board from the **Tools > Board** menu.
-3. Connect your ESP32 board to your computer via USB.
-4. Click the **Upload** button to compile and flash the sketch.
+3. Select **"Huge APP (3MB No OTA/1MB SPIFFS)"** from **Tools > Partition Scheme** menu.
+4. Enable **"Erase All Flash Before Sketch Upload"** option from **Tools** menu.
+5. Connect your ESP32 board to your computer via USB.
+6. Click the **Upload** button to compile and flash the sketch.
 
 ## Expected Output
 
diff --git a/libraries/Matter/examples/MatterWaterLeakDetector/README.md b/libraries/Matter/examples/MatterWaterLeakDetector/README.md
@@ -78,8 +78,10 @@ Before uploading the sketch, configure the following:
 
 1. Open the `MatterWaterLeakDetector.ino` sketch in the Arduino IDE.
 2. Select your ESP32 board from the **Tools > Board** menu.
-3. Connect your ESP32 board to your computer via USB.
-4. Click the **Upload** button to compile and flash the sketch.
+3. Select **"Huge APP (3MB No OTA/1MB SPIFFS)"** from **Tools > Partition Scheme** menu.
+4. Enable **"Erase All Flash Before Sketch Upload"** option from **Tools** menu.
+5. Connect your ESP32 board to your computer via USB.
+6. Click the **Upload** button to compile and flash the sketch.
 
 ## Expected Output
 
diff --git a/libraries/Matter/examples/MatterWindowCovering/README.md b/libraries/Matter/examples/MatterWindowCovering/README.md
@@ -82,8 +82,10 @@ Before uploading the sketch, configure the following:
 
 1. Open the `MatterWindowCovering.ino` sketch in the Arduino IDE.
 2. Select your ESP32 board from the **Tools > Board** menu.
-3. Connect your ESP32 board to your computer via USB.
-4. Click the **Upload** button to compile and flash the sketch.
+3. Select **"Huge APP (3MB No OTA/1MB SPIFFS)"** from **Tools > Partition Scheme** menu.
+4. Enable **"Erase All Flash Before Sketch Upload"** option from **Tools** menu.
+5. Connect your ESP32 board to your computer via USB.
+6. Click the **Upload** button to compile and flash the sketch.
 
 ## Expected Output
 
