[BUG]Xavier NX not flashable.

[iPsych]

Describe the issue
Xavier NX with EMMC which
1)can successfully go to Force-Recovery Mode
2)Flash using nvidia SDK Manager works fine.
3)I could migrate to NVME using https://github.com/jetsonhacks/rootOnNVMe
(Which no problem, since I will let EMMC as is... unlike SDcard, it's no problem.

Which version of Ubuntu on the Host machine
Ubuntu version:
18.04 LTS

What version of L4T/JetPack
L4T/JetPack version:
Jetpack 5
Which Jetson
Jetson:
Xavier NX

So, my question is Xavier NX with EMMC is not flashable using this tool?
I am using it now with your awesome rootOnNVMe tool. Just curious & for confirmation.

[jetsonhacks]

I don't understand the question. What error message did you receive when using this code?

[gilcohn-spearuav]

After following the instructions and after flash_jetson_external_storage.sh the jetson isn’t booting up.
the process was successful at the end of the burn.

Ubuntu version on the Host machine:
18.04 LTS

Jetson:
Xavier NX
Board - Seeed Studio 203

Remarks
I am able to flash the jetson using the SDK manager and migrate to NVME using the rootOnNVME repo

[jwdinius]

I may be able to add some additional context here since I just tried (unsuccessfully) to flash an Recomputer R2021, which uses the Xavier NX dev kit with eMMC. Here is the stdout I get when running the flash_jetson_external_storage.sh script with defaults:

***************************************
*                                     *
*  Step 3: Start the flashing process *
*                                     *
***************************************
Waiting for target to boot-up...
Waiting for target to boot-up...
Waiting for target to boot-up...
Waiting for target to boot-up...
Waiting for target to boot-up...
Waiting for target to boot-up...
Waiting for target to boot-up...
Waiting for target to boot-up...
Waiting for target to boot-up...
Waiting for target to boot-up...
Waiting for target to boot-up...
Waiting for target to boot-up...
Waiting for target to boot-up...
Waiting for target to boot-up...
Waiting for target to boot-up...
Waiting for target to boot-up...
Waiting for target to boot-up...
Waiting for target to boot-up...
Waiting for target to boot-up...
Waiting for device to expose ssh ......RTNETLINK answers: File exists
RTNETLINK answers: File exists
Waiting for device to expose ssh ...Run command: flash on fc00:1:1:0::2
SSH ready
4194304
[ 0]: l4t_flash_from_kernel: Starting to create gpt for emmc
Active index file is /mnt/internal/flash.idx
Number of lines is 42
max_index=41
[ 3]: l4t_flash_from_kernel: Successfully create gpt for emmc
[ 3]: l4t_flash_from_kernel: Starting to create gpt for external device
Active index file is /mnt/external/flash.idx
Number of lines is 17
max_index=16
writing item=1, 9:0:primary_gpt, 512, 19968, gpt_primary_9_0.bin, 16896, fixed-<reserved>-0, e2b095542bc1a8779f8f001aa4b82cd915478b76
Error: Could not stat device /dev/nvme0n1 - No such file or directory.
Flash failure
Cleaning up...

Note: I have installed an external storage device that was previously recognized at /dev/nvme0n1 with the pre-installed 4.6.1 Jetpack and an upgrade flashed using the steps from the vendor. I think I will use the NVidia flash instructions and then just use the rootOnNVME repo referenced above.