Make consistent how models are listed in a table.

Author: katshann-raspberry

documentation/asciidoc/computers/config_txt/conditional.adoc

@@ -14,31 +14,31 @@ The `[all]` filter is the most basic filter. It resets all previously set filter
 The conditional model filters apply according to the following table.
 
 |===
-| Filter | Applicable model(s)
+| Filter | Applicable models
 
 | `[pi1]`
-| Model 1A, Model 1B, Model 1A+, Model 1B+, Compute Module 1
+| 1A, 1B, 1A+, 1B+, Compute Module 1
 
 | `[pi2]`
-| Model 2B (BCM2836- or BCM2837-based)
+| 2B (BCM2836- or BCM2837-based)
 
 | `[pi3]`
-| Model 3B, Model 3B+, Model 3A+, Compute Module 3, Compute Module 3+
+| 3B, 3B+, 3A+, Compute Module 3, Compute Module 3+
 
 | `[pi3+]`
-| Model 3A+, Model 3B+ (also sees `[pi3]` contents)
+| 3A+, 3B+ (also sees `[pi3]` contents)
 
 | `[pi4]`
-| Model 4B, Pi 400, Compute Module 4, Compute Module 4S
+| 4B, 400, Compute Module 4, Compute Module 4S
 
 | `[pi5]`
-| Raspberry Pi 5, Compute Module 5, Pi 500, Pi 500+
+| 5, 500, 500+, Compute Module 5
 
 | `[pi400]`
-| Pi 400 (also sees `[pi4]` contents)
+| 400 (also sees `[pi4]` contents)
 
 | `[pi500]`
-| Pi 500/500+ (also sees `[pi5]` contents)
+| 500/500+ (also sees `[pi5]` contents)
 
 | `[cm1]`
 | Compute Module 1 (also sees `[pi1]` contents)