Update from review comments

Author: katshann-raspberry

documentation/asciidoc/accessories/ai-hat-plus/about.adoc

@@ -11,7 +11,7 @@ The AI HAT+ is available in 13 and 26 tera-operations per second (TOPS) variants
 
 The AI HAT+ communicates using Raspberry Pi 5's PCIe interface. The host Raspberry Pi 5 automatically detects the on-board Hailo accelerator and uses the NPU for supported AI computing tasks. Raspberry Pi OS's built-in `rpicam-apps` camera applications automatically use the NPU to run compatible post-processing tasks.
 
-WARNING: The Raspberry Pi AI HAT+ is not yet supported with Raspberry Pi OS Trixie. To use AI HAT+, install or stay on Raspberry Pi OS Bookworm for now.
+WARNING: The Raspberry Pi AI HAT+ is not yet supported by Raspberry Pi OS Trixie. To use AI HAT+, install or stay on Raspberry Pi OS Bookworm for now.
 
 [[ai-hat-plus-installation]]
 == Install

documentation/asciidoc/accessories/ai-kit/about.adoc

@@ -12,7 +12,7 @@ The Raspberry Pi AI Kit bundles the xref:m2-hat-plus.adoc#m2-hat-plus[Raspberry
 * mounting hardware kit
 * 16mm stacking GPIO header
 
-WARNING: The Raspberry Pi AI Kit is not yet supported with Raspberry Pi OS Trixie. To use the AI Kit, install or stay on Raspberry Pi OS Bookworm for now.
+WARNING: The Raspberry Pi AI Kit is not yet supported by Raspberry Pi OS Trixie. To use the AI Kit, install or stay on Raspberry Pi OS Bookworm for now.
 
 == AI module features
 

documentation/asciidoc/accessories/build-hat/introduction.adoc

@@ -1,7 +1,9 @@
 [[about-build-hat]]
 == About
 
-The https://raspberrypi.com/products/build-hat[Raspberry Pi Build HAT] is an add-on board that connects to the 40-pin GPIO header of your Raspberry Pi, which was designed in collaboration with LEGO® Education to make it easy to control LEGO® Technic™ motors and sensors with Raspberry Pi computers. 
+The https://raspberrypi.com/products/build-hat[Raspberry Pi Build HAT] is an add-on board that connects to the 40-pin GPIO header of your Raspberry Pi, which was designed in collaboration with LEGO® Education to make it easy to control LEGO® Technic™ motors and sensors with Raspberry Pi computers.
+
+WARNING: The Raspberry Pi Build HAT is not yet supported by Raspberry Pi OS Trixie. To use the Build HAT, install or stay on Raspberry Pi OS Bookworm for now.
 
 image::images/build-hat.jpg[width="80%"]
 

documentation/asciidoc/accessories/tv-hat/about-tv-hat.adoc

@@ -15,8 +15,6 @@ Key features:
 ** DVB-T2: 1.7MHz, 5MHz, 6MHz, 7MHz, 8MHz
 ** DVB-T: 5MHz, 6MHz, 7MHz, 8MHz
 
-WARNING: The Raspberry Pi TV HAT is not yet supported with Raspberry Pi OS Trixie. To use the TV HAT, install or stay on Raspberry Pi OS Bookworm for now.
-
 == About DVB-T
 
 WARNING: The TV HAT does not support ATSC, the digital TV standard used in North America.