mingo output incorrectly aligned

[simgar]

I've been using scip with my RPi3 and 'RPi serial output to USB cable'. I've also been using Python's miniterm for comparison. With the command:

sudo python3 -m serial.tools.miniterm /dev/ttyUSB0 921600

I get

--- Miniterm on /dev/ttyUSB0  921600,8,N,1 ---
--- Quit: Ctrl+] | Menu: Ctrl+T | Help: Ctrl+T followed by Ctrl+H ---
[0] mingo version 0.5.0
[1] Booting on: Raspberry Pi 3
[2] Drivers loaded:
	  1. BCM PL011 UART
	  2. BCM GPIO
[3] Chars written: 117
[4] Echoing input now

When I use scip with:

scip /dev/ttyUSB0 921600

I get:

Welcome to scip.
To exit type <Enter> + ~ + .
or unplug the serial port.
[0] mingo version 0.5.0
					   [1] Booting on: Raspberry Pi 3
													 [2] Drivers loaded:
																			  1. BCM PL011 UART
					 2. BCM GPIO
								[3] Chars written: 117
													  [4] Echoing input now

Here, it was stated that mingo is only sending \n where it should be sending \r\n.

[BartMassey]

Yes, thank you for the issue report. We are working on fixing this and other things.