AllConfig

This is a simple Klipper utility that allows for outputting your entire config, as Klipper sees it, to a file.

This is the same config that is shown at the top of your klippy.log, but is easier to access since:

1. It's in your config folder, so you don't have to navigate to the logs section
2. It's a lot smaller than your log, so it's a lot quicker to open and scroll through, CTRL+F, etc.

Installation

In SSH:

cd ~/
git clone https://github.com/3DCoded/Klipper-AllConfig
cd ~/Klipper-AllConfig
ln -f allconfig.py ~/klipper/klippy/extras/allconfig.py
sudo service klipper restart

Configuration

Anywhere in your printer.cfg, add:

[allconfig]
# Optionally, define a custom output path.
# output: ~/printer_data/config/allconfig.cfg

Restart Klipper.

Usage

Whenever you restart Klipper, you will now see an allconfig.cfg file in the same folder as your printer.cfg. If you defined a custom output, it will be at the path you selected.

Inside will be the entirety of your Klipper config, as seen by Klipper. This means that all include sections, overridden sections, and SAVE_CONFIG are all taken into account. This can help to diagnose common config issues.

Updating

In SSH:

cd ~/Klipper-AllConfig
git pull
ln -f allconfig.py ~/klipper/klippy/extras/allconfig.py
sudo service klipper restart

Other Projects

If you liked this project, don't forget to give it a star! Also check out my other projects:

• 3MS modular multi-material system for Klipper
• DynamicMacros never restart Klipper for simple macros...and much more
• KlipperMaintenance Keep your 3D printer running smoothly