chore: Bump the github-actions-all group with 5 updates

[dependabot]

Bumps the github-actions-all group with 5 updates:

Package	From	To
dtolnay/rust-toolchain	6c977a6ca4077a0ceb28ffbe03f59d46e9ac8772	02cb101ec7c40f2c49e1d9714d64511d8e1b74de
github/codeql-action/init	4.38.0	4.38.1
github/codeql-action/analyze	4.38.0	4.38.1
docker/setup-buildx-action	4.3.0	4.4.1
docker/build-push-action	7.3.0	7.4.0

Updates dtolnay/rust-toolchain from 6c977a6ca4077a0ceb28ffbe03f59d46e9ac8772 to 02cb101ec7c40f2c49e1d9714d64511d8e1b74de

Commits

• 02cb101 Merge pull request 185 from fufesou/feat/force-non-host
• b38a663 Pass --force-non-host unconditionally
• a4f61a0 Document rustup non-host opt-in requirement
• 06b350f Support force-non-host toolchains
• d103106 Predefine branches up to 1.120
• 3ea7b2d Add 1.98.1 patch release
• See full diff in compare view

Updates github/codeql-action/init from 4.38.0 to 4.38.1

Release notes

Sourced from github/codeql-action/init's releases.

v4.38.1

• The CodeQL Action now has experimental support for CodeQL releases for which per-language bundles are available. Per-language bundles support analysis for a single language and are therefore smaller than the combined bundles that allow analysis for all supported languages. As a result, per-language bundles take up less space on disk and are faster to download. We expect to roll this change out to everyone in the coming weeks. #4146

Changelog

Sourced from github/codeql-action/init's changelog.

CodeQL Action Changelog

See the releases page for the relevant changes to the CodeQL CLI and language packs.

[UNRELEASED]

No user facing changes.

4.38.1 - 18 Sept 2026

• The CodeQL Action now has experimental support for CodeQL releases for which per-language bundles are available. Per-language bundles support analysis for a single language and are therefore smaller than the combined bundles that allow analysis for all supported languages. As a result, per-language bundles take up less space on disk and are faster to download. We expect to roll this change out to everyone in the coming weeks. #4146

4.38.0 - 09 Sept 2026

• On GitHub-hosted runners, the CodeQL Action now deletes unused CodeQL bundles from the toolcache before downloading a different bundle, which frees up disk space for the analysis. We expect to roll this change out to everyone in September. #4124
• The CodeQL Action now supports CodeQL releases that are compatible with Linux Arm64 and downloads the native linux-arm64 CodeQL bundle when available. #4072
• Update default CodeQL bundle version to 2.27.0. #4129

4.37.9 - 26 Aug 2026

• Update default CodeQL bundle version to 2.26.4. #4106

4.37.8 - 21 Aug 2026

No user facing changes.

4.37.7 - 13 Aug 2026

• Update default CodeQL bundle version to 2.26.3. #4085

4.37.6 - 04 Aug 2026

• Changed the default filepath for the new remote file address format that was introduced in CodeQL Action 4.37.0 / 3.37.0 to .github/codeql-config.yml to align it with the suggested path that is used elsewhere. #4070

4.37.5 - 03 Aug 2026

• Fixed a bug where a network error while streaming the download of the CodeQL bundle could terminate the init Action instead of falling back to downloading the bundle before extracting it. #4061

4.37.4 - 29 Jul 2026

• This version of the CodeQL Action adds support for the tools input for the codeql-action/init step to be specified using a github-codeql-tools repository property. This feature will gradually be rolled out following the release of this version. Once rolled out, this allows for the CodeQL CLI version that is used in GitHub-managed workflows, such as Default Setup, to be set to a custom value. For example, customers who run into issues with rate limits when a new CodeQL CLI version is released can set the value to toolcache to always use the CodeQL CLI version that is available in the runner toolcache. For Advanced Setup workflows, the value provided for tools in the workflow definition always takes precedence unless the value of the repository property starts with !. #4037
• Update default CodeQL bundle version to 2.26.2. #4051

4.37.3 - 22 Jul 2026

No user facing changes.

4.37.2 - 21 Jul 2026

• The new address format for the config-file input that was introduced in CodeQL Action 4.37.0 is now enabled by default. In addition to the format described there, the remote= prefix can now be used to explicitly indicate that the input refers to a remote file. All previous input formats continue to be accepted as well. #4023

... (truncated)

Commits

• 1c5b675 Merge pull request #4152 from github/update-v4.38.1-a65b83a73
• a97cdca Add changelog entry for #4146
• cc6c691 Update changelog for v4.38.1
• a65b83a Merge pull request #4146 from github/henrymercer/per-language-bundles-pr
• 07fa87d Clarify the latest-nightly eligibility exception
• f18f353 Describe the bundle URL resolver
• ecec9b5 Share per-language telemetry fields without renaming
• 79fe3a1 Move download telemetry into the status-report directory
• ead1f7d Rename the platform module
• 549d498 Simplify per-language platform eligibility checks
• Additional commits viewable in compare view

Updates github/codeql-action/analyze from 4.38.0 to 4.38.1

Release notes

Sourced from github/codeql-action/analyze's releases.

v4.38.1

• The CodeQL Action now has experimental support for CodeQL releases for which per-language bundles are available. Per-language bundles support analysis for a single language and are therefore smaller than the combined bundles that allow analysis for all supported languages. As a result, per-language bundles take up less space on disk and are faster to download. We expect to roll this change out to everyone in the coming weeks. #4146

Changelog

Sourced from github/codeql-action/analyze's changelog.

CodeQL Action Changelog

See the releases page for the relevant changes to the CodeQL CLI and language packs.

[UNRELEASED]

No user facing changes.

4.38.1 - 18 Sept 2026

• The CodeQL Action now has experimental support for CodeQL releases for which per-language bundles are available. Per-language bundles support analysis for a single language and are therefore smaller than the combined bundles that allow analysis for all supported languages. As a result, per-language bundles take up less space on disk and are faster to download. We expect to roll this change out to everyone in the coming weeks. #4146

4.38.0 - 09 Sept 2026

• On GitHub-hosted runners, the CodeQL Action now deletes unused CodeQL bundles from the toolcache before downloading a different bundle, which frees up disk space for the analysis. We expect to roll this change out to everyone in September. #4124
• The CodeQL Action now supports CodeQL releases that are compatible with Linux Arm64 and downloads the native linux-arm64 CodeQL bundle when available. #4072
• Update default CodeQL bundle version to 2.27.0. #4129

4.37.9 - 26 Aug 2026

• Update default CodeQL bundle version to 2.26.4. #4106

4.37.8 - 21 Aug 2026

No user facing changes.

4.37.7 - 13 Aug 2026

• Update default CodeQL bundle version to 2.26.3. #4085

4.37.6 - 04 Aug 2026

• Changed the default filepath for the new remote file address format that was introduced in CodeQL Action 4.37.0 / 3.37.0 to .github/codeql-config.yml to align it with the suggested path that is used elsewhere. #4070

4.37.5 - 03 Aug 2026

• Fixed a bug where a network error while streaming the download of the CodeQL bundle could terminate the init Action instead of falling back to downloading the bundle before extracting it. #4061

4.37.4 - 29 Jul 2026

• This version of the CodeQL Action adds support for the tools input for the codeql-action/init step to be specified using a github-codeql-tools repository property. This feature will gradually be rolled out following the release of this version. Once rolled out, this allows for the CodeQL CLI version that is used in GitHub-managed workflows, such as Default Setup, to be set to a custom value. For example, customers who run into issues with rate limits when a new CodeQL CLI version is released can set the value to toolcache to always use the CodeQL CLI version that is available in the runner toolcache. For Advanced Setup workflows, the value provided for tools in the workflow definition always takes precedence unless the value of the repository property starts with !. #4037
• Update default CodeQL bundle version to 2.26.2. #4051

4.37.3 - 22 Jul 2026

No user facing changes.

4.37.2 - 21 Jul 2026

• The new address format for the config-file input that was introduced in CodeQL Action 4.37.0 is now enabled by default. In addition to the format described there, the remote= prefix can now be used to explicitly indicate that the input refers to a remote file. All previous input formats continue to be accepted as well. #4023

... (truncated)

Commits

• 1c5b675 Merge pull request #4152 from github/update-v4.38.1-a65b83a73
• a97cdca Add changelog entry for #4146
• cc6c691 Update changelog for v4.38.1
• a65b83a Merge pull request #4146 from github/henrymercer/per-language-bundles-pr
• 07fa87d Clarify the latest-nightly eligibility exception
• f18f353 Describe the bundle URL resolver
• ecec9b5 Share per-language telemetry fields without renaming
• 79fe3a1 Move download telemetry into the status-report directory
• ead1f7d Rename the platform module
• 549d498 Simplify per-language platform eligibility checks
• Additional commits viewable in compare view

Updates docker/setup-buildx-action from 4.3.0 to 4.4.1

Release notes

Sourced from docker/setup-buildx-action's releases.

v4.4.1

• Skip BuildKit image pre-pulls for explicit endpoints by @​crazy-max in docker/setup-buildx-action#624

Full Changelog: docker/setup-buildx-action@v4.4.0...v4.4.1

v4.4.0

• Use official Buildx releases for cloud driver by @​crazy-max in docker/setup-buildx-action#606
• Pull BuildKit image before builder creation by @​crazy-max in docker/setup-buildx-action#609
• Use shared error helpers for Buildx and Docker commands by @​crazy-max in docker/setup-buildx-action#620
• Bump @​docker/actions-toolkit from 0.95.0 to 0.100.0 in docker/setup-buildx-action#610 docker/setup-buildx-action#618 docker/setup-buildx-action#619
• Bump @​humanfs/node from 0.16.7 to 0.16.8 in docker/setup-buildx-action#614
• Bump js-yaml from 5.3.0 to 5.4.2 in docker/setup-buildx-action#608 docker/setup-buildx-action#617
• Bump postcss-selector-parser from 7.1.1 to 7.1.5 in docker/setup-buildx-action#611

Full Changelog: docker/setup-buildx-action@v4.3.0...v4.4.0

Commits

• f87e599 Merge pull request #624 from crazy-max/skip-pull-with-endpoint
• e700274 chore: update generated content
• 3061c91 skip BuildKit image pre-pulls for explicit endpoints
• 594f3bf Merge pull request #609 from crazy-max/pull-buildkit-image-before-create
• bd6e702 chore: update generated content
• 6268c9d pull BuildKit image before builder creation
• e823525 Merge pull request #621 from docker/dependabot/github_actions/codeql-actions-...
• 533ed8e build(deps): bump the codeql-actions group with 2 updates
• bedaf13 Merge pull request #620 from crazy-max/shared-error-helpers
• d5079fb chore: update generated content
• Additional commits viewable in compare view

Updates docker/build-push-action from 7.3.0 to 7.4.0

Release notes

Sourced from docker/build-push-action's releases.

v7.4.0

• Use the shared error helper for Buildx commands by @​crazy-max in docker/build-push-action#1620
• Prevent workflow command injection in metadata logs by @​crazy-max in docker/build-push-action#1617
• Bump @​docker/actions-toolkit from 0.92.0 to 0.100.0 in docker/build-push-action#1614 docker/build-push-action#1618 docker/build-push-action#1621
• Bump @​humanfs/node from 0.16.7 to 0.16.8 in docker/build-push-action#1609
• Bump brace-expansion from 1.1.13 to 1.1.18 in docker/build-push-action#1592
• Bump csv-parse from 7.0.0 to 7.0.2 in docker/build-push-action#1613
• Bump js-yaml from 4.3.0 to 4.3.2 in docker/build-push-action#1605 docker/build-push-action#1615
• Bump nanoid from 3.3.16 to 3.3.18 in docker/build-push-action#1611
• Bump postcss from 8.5.10 to 8.5.25 in docker/build-push-action#1590
• Bump postcss-selector-parser from 7.1.1 to 7.1.5 in docker/build-push-action#1606
• Bump sigstore from 4.1.0 to 4.1.1 in docker/build-push-action#1577
• Bump undici from 6.27.0 to 6.28.0 in docker/build-push-action#1594

Full Changelog: docker/build-push-action@v7.3.0...v7.4.0

Commits

• c3c9e26 Merge pull request #1621 from docker/dependabot/npm_and_yarn/docker/actions-t...
• 459b674 [dependabot skip] chore: update generated content
• 4dedcb2 chore(deps): Bump @​docker/actions-toolkit from 0.99.0 to 0.100.0
• 379bf63 Merge pull request #1620 from crazy-max/buildx-error-message
• 9877975 chore: update generated content
• 7ed0556 use the shared Buildx error summary helper
• 91670ba Merge pull request #1618 from docker/dependabot/npm_and_yarn/docker/actions-t...
• 80dbc86 [dependabot skip] chore: update generated content
• 50cac3a chore(deps): Bump @​docker/actions-toolkit from 0.98.0 to 0.99.0
• 03b4d6c Merge pull request #1617 from crazy-max/fix-metadata-workflow-commands
• Additional commits viewable in compare view

Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting @dependabot rebase.

---

Dependabot commands and options

You can trigger Dependabot actions by commenting on this PR:

• @dependabot rebase will rebase this PR
• @dependabot recreate will recreate this PR, overwriting any edits that have been made to it
• @dependabot show <dependency name> ignore conditions will show all of the ignore conditions of the specified dependency
• @dependabot ignore <dependency name> major version will close this group update PR and stop Dependabot creating any more for the specific dependency's major version (unless you unignore this specific dependency's major version or upgrade to it yourself)
• @dependabot ignore <dependency name> minor version will close this group update PR and stop Dependabot creating any more for the specific dependency's minor version (unless you unignore this specific dependency's minor version or upgrade to it yourself)
• @dependabot ignore <dependency name> will close this group update PR and stop Dependabot creating any more for the specific dependency (unless you unignore this specific dependency or upgrade to it yourself)
• @dependabot unignore <dependency name> will remove all of the ignore conditions of the specified dependency
• @dependabot unignore <dependency name> <ignore condition> will remove the ignore condition of the specified dependency and ignore conditions

[coderabbitai]

Important

Review skipped

Bot user detected.

To trigger a single review, invoke the @coderabbitai review command.

⚙️ Run configuration

Configuration used: Repository: InstaZDLL/waveflow-server/.coderabbit.yaml

Review profile: ASSERTIVE

Plan: Advanced

Run ID: 0b211eb5-ad6f-48c5-8c75-8b36f89821e2

You can disable this status message by setting the reviews.review_status to false in the CodeRabbit configuration file.

Use the checkbox below for a quick retry:

• 🔍 Trigger review

---

_{Comment @coderabbitai help to get the list of available commands.}