Tripp Lite SRCOOL Custom Integration

Control and monitor your Tripp Lite SR(X)COOL series portable air‐conditioner directly from Home Assistant over Telnet.

---

📝 Features

• Climate control
  • Set target temperature (63 °F – 86 °F) via UI slider
  • Change fan speed (Low, Medium, High, Auto)
  • Toggle cooling on/off
• Status monitoring
  • Return Air Temperature
  • Water Status (Not Full / Full)
  • Quiet Mode (Enabled / Disabled)
  • Auto Fan Speed (On / Off)
• Device info exposed as entity attributes and sensors
  • Device Name, Vendor, Product, Protocol, Installation Date, State, Type, Port Mode, Port Name
• Separate sensors for each status field (water status, quiet mode, auto‐fan, fan speed, etc.)
• Config flow–driven setup (no YAML) with reauthentication support
• Built‑in icon displayed above using icon.png

---

🔧 Prerequisites

• Home Assistant Core 2024.9 or later
• SRCOOL unit with Telnet enabled
• Network reachability from your HA host to the SRCOOL device

---

🚀 Installation

1. Clone or download this repo into your custom_components folder:

   mkdir -p config/custom_components/tripp_lite_srcool
   cp -R tripp_lite_srcool/* config/custom_components/tripp_lite_srcool/