chore(deps): bump github/codeql-action/upload-sarif from 3.37.3 to 4.37.7

[dependabot]

Bumps github/codeql-action/upload-sarif from 3.37.3 to 4.37.7.

Release notes

Sourced from github/codeql-action/upload-sarif's releases.

v4.37.7

• Update default CodeQL bundle version to 2.26.3. #4085

v4.37.6

• Changed the default filepath for the new remote file address format that was introduced in CodeQL Action 4.37.0 / 3.37.0 to .github/codeql-config.yml to align it with the suggested path that is used elsewhere. #4070

v4.37.5

• Fixed a bug where a network error while streaming the download of the CodeQL bundle could terminate the init Action instead of falling back to downloading the bundle before extracting it. #4061

v4.37.4

• This version of the CodeQL Action adds support for the tools input for the codeql-action/init step to be specified using a github-codeql-tools repository property. This feature will gradually be rolled out following the release of this version. Once rolled out, this allows for the CodeQL CLI version that is used in GitHub-managed workflows, such as Default Setup, to be set to a custom value. For example, customers who run into issues with rate limits when a new CodeQL CLI version is released can set the value to toolcache to always use the CodeQL CLI version that is available in the runner toolcache. For Advanced Setup workflows, the value provided for tools in the workflow definition always takes precedence unless the value of the repository property starts with !. #4037
• Update default CodeQL bundle version to 2.26.2. #4051

v4.37.3

No user facing changes.

v4.37.2

• The new address format for the config-file input that was introduced in CodeQL Action 4.37.0 is now enabled by default. In addition to the format described there, the remote= prefix can now be used to explicitly indicate that the input refers to a remote file. All previous input formats continue to be accepted as well. #4023
• The CodeQL Action can now make use of configured private registries in Default Setup to retrieve CodeQL configuration files from remote repositories that require authentication. This will allow customers to store their CodeQL configuration in a single repository that can then be referenced by Default Setup workflows in other repositories. We expect to roll this and other, related changes out to everyone in July. #4007

v4.37.1

• Upcoming breaking change: Add a deprecation warning for customers using CodeQL version 2.20.6 and earlier. These versions of CodeQL were discontinued on 1 July 2026 alongside GitHub Enterprise Server 3.16, and will be unsupported by the next minor release of the CodeQL Action. #3956
• Update default CodeQL bundle version to 2.26.1. #4019

v4.37.0

• Update default CodeQL bundle version to 2.26.0. #3995
• In addition to the existing input format, the config-file input for the codeql-action/init step will soon support a new [owner/]repo[@ref][:path] format. All components except the repository name are optional. If omitted, owner defaults to the same owner as the repository the analysis is running for, ref to main, and path to .github/codeql-action.yaml. Support for this format ships in this version of the CodeQL Action, but will only be enabled over the coming weeks. #3973

v4.36.3

No user facing changes.

v4.36.2

• Cache CodeQL CLI version information across Actions steps. #3943
• Reduce requests while waiting for analysis processing by using exponential backoff when polling SARIF processing status. #3937
• Update default CodeQL bundle version to 2.25.6. #3948

v4.36.1

No user facing changes.

v4.36.0

• Breaking change: Bump the minimum required CodeQL bundle version to 2.19.4. #3894
• Add support for SHA-256 Git object IDs. #3893
• Update default CodeQL bundle version to 2.25.5. #3926

v4.35.5

• We have improved how the JavaScript bundles for the CodeQL Action are generated to avoid duplication across bundles and reduce the size of the repository by around 70%. This should have no effect on the runtime behaviour of the CodeQL Action. #3899
• For performance and accuracy reasons, improved incremental analysis will now only be enabled on a pull request when diff-informed analysis is also enabled for that run. If diff-informed analysis is unavailable (for example, because the PR diff ranges could not be computed), the action will fall back to a full analysis. #3791
• If multiple inputs are provided for the GitHub-internal analysis-kinds input, only code-scanning will be enabled. The analysis-kinds input is experimental, for GitHub-internal use only, and may change without notice at any time. #3892
• Added an experimental change which, when running a Code Scanning analysis for a PR with improved incremental analysis enabled, prefers CodeQL CLI versions that have a cached overlay-base database for the configured languages. This speeds up analysis for a repository when there is not yet a cached overlay-base database for the latest CLI version. We expect to roll this change out to everyone in May. #3880

... (truncated)

Changelog

Sourced from github/codeql-action/upload-sarif's changelog.

CodeQL Action Changelog

See the releases page for the relevant changes to the CodeQL CLI and language packs.

[UNRELEASED]

No user facing changes.

4.37.7 - 13 Aug 2026

• Update default CodeQL bundle version to 2.26.3. #4085

4.37.6 - 04 Aug 2026

• Changed the default filepath for the new remote file address format that was introduced in CodeQL Action 4.37.0 / 3.37.0 to .github/codeql-config.yml to align it with the suggested path that is used elsewhere. #4070

4.37.5 - 03 Aug 2026

• Fixed a bug where a network error while streaming the download of the CodeQL bundle could terminate the init Action instead of falling back to downloading the bundle before extracting it. #4061

4.37.4 - 29 Jul 2026

• This version of the CodeQL Action adds support for the tools input for the codeql-action/init step to be specified using a github-codeql-tools repository property. This feature will gradually be rolled out following the release of this version. Once rolled out, this allows for the CodeQL CLI version that is used in GitHub-managed workflows, such as Default Setup, to be set to a custom value. For example, customers who run into issues with rate limits when a new CodeQL CLI version is released can set the value to toolcache to always use the CodeQL CLI version that is available in the runner toolcache. For Advanced Setup workflows, the value provided for tools in the workflow definition always takes precedence unless the value of the repository property starts with !. #4037
• Update default CodeQL bundle version to 2.26.2. #4051

4.37.3 - 22 Jul 2026

No user facing changes.

4.37.2 - 21 Jul 2026

• The new address format for the config-file input that was introduced in CodeQL Action 4.37.0 is now enabled by default. In addition to the format described there, the remote= prefix can now be used to explicitly indicate that the input refers to a remote file. All previous input formats continue to be accepted as well. #4023
• The CodeQL Action can now make use of configured private registries in Default Setup to retrieve CodeQL configuration files from remote repositories that require authentication. This will allow customers to store their CodeQL configuration in a single repository that can then be referenced by Default Setup workflows in other repositories. We expect to roll this and other, related changes out to everyone in July. #4007

4.37.1 - 16 Jul 2026

• Upcoming breaking change: Add a deprecation warning for customers using CodeQL version 2.20.6 and earlier. These versions of CodeQL were discontinued on 1 July 2026 alongside GitHub Enterprise Server 3.16, and will be unsupported by the next minor release of the CodeQL Action. #3956
• Update default CodeQL bundle version to 2.26.1. #4019

4.37.0 - 08 Jul 2026

• Update default CodeQL bundle version to 2.26.0. #3995
• In addition to the existing input format, the config-file input for the codeql-action/init step will soon support a new [owner/]repo[@ref][:path] format. All components except the repository name are optional. If omitted, owner defaults to the same owner as the repository the analysis is running for, ref to main, and path to .github/codeql-action.yaml. Support for this format ships in this version of the CodeQL Action, but will only be enabled over the coming weeks. #3973

4.36.3 - 01 Jul 2026

No user facing changes.

4.36.2 - 04 Jun 2026

... (truncated)

Commits

• ff2f1c6 Merge pull request #4093 from github/update-v4.37.7-be7a3dbb8
• 951a133 Update changelog for v4.37.7
• be7a3db Merge pull request #4087 from github/dependabot/npm_and_yarn/npm-minor-0aa561...
• 9310334 Merge pull request #4086 from github/mbg/thread-action-state-to-codeql
• b4d8a54 Rebuild
• ab5db25 Bump the npm-minor group across 1 directory with 8 updates
• 38055a3 Drop logger from databaseInitCluster in interface
• 1f87aed Merge pull request #4085 from github/update-bundle/codeql-bundle-v2.26.3
• dc1b98a Make logger available to getCodeQLForCmd
• 6f0220e Merge pull request #4084 from github/navntoft/bump-undici
• Additional commits viewable in compare view

[dependabot]

Labels

The following labels could not be found: github-actions. Please create it before Dependabot can add it to a pull request.

Please fix the above issues or remove invalid values from dependabot.yml.

[github-actions]

Major version bump detected — this PR was NOT auto-merged.

Someone needs to review the breaking changes in the changelog
before we upgrade. Once reviewed, close if incompatible or
merge manually.

[github-actions]

Major version bump detected — this PR was NOT auto-merged.

Someone needs to review the breaking changes in the changelog
before we upgrade. Once reviewed, close if incompatible or
merge manually.

[github-actions]

Major version bump detected — this PR was NOT auto-merged.

Someone needs to review the breaking changes in the changelog
before we upgrade. Once reviewed, close if incompatible or
merge manually.

[github-actions]

Major version bump detected — this PR was NOT auto-merged.

Someone needs to review the breaking changes in the changelog
before we upgrade. Once reviewed, close if incompatible or
merge manually.