erlang_quic

Pure Erlang QUIC implementation (RFC 9000/9001).

Features

QUIC transport (RFC 9000 / 9001)

• TLS 1.3 handshake (RFC 8446)
• Stream multiplexing (bidirectional and unidirectional)
• Key update support (RFC 9001 Section 6)
• Connection migration with active path migration API (RFC 9000 Section 9)
• 0-RTT early data support with session resumption (RFC 9001 Section 4.6)
• DATAGRAM frame support for unreliable data (RFC 9221)
• QUIC v2 support (RFC 9369)
• Server mode with listener and pooled listeners (SO_REUSEPORT)
• QUIC-LB load balancer support with routable CIDs (RFC 9312)
• Retry packet handling for address validation (RFC 9000 Section 8.1)
• Stateless reset support (RFC 9000 Section 10.3)
• Spin bit (RFC 9000 §17.4) and full NEW_TOKEN issuance/validation
• RESET_STREAM_AT extension
• Flow control (connection and stream level) with RTT-based auto-tune
• Congestion control (NewReno, CUBIC, BBR with ECN support)
• HyStart++ slow start (RFC 9406)
• Packet pacing (RFC 9002 Section 7.7)
• Loss detection and packet retransmission (RFC 9002)
• QLOG tracing support for debug visibility
• UDP packet batching (GSO/GRO)
• Client certificate verification

HTTP/3 (quic_h3)

• Full HTTP/3 client and server (RFC 9114) with QPACK header compression (RFC 9204)
• HTTP Datagrams (RFC 9297) with capsule framing
• Server Push (RFC 9114 Section 4.6)
• Extensible Priorities (RFC 9218): PRIORITY_UPDATE frames, urgency / incremental
• Extended CONNECT (RFC 9220) for WebTransport-style upgrades
• Extension stream hooks: stream_type_handler (peer-claimed uni/bidi) and quic_h3:open_bidi_stream/1,2 (client-initiated, pre-claimed with a signal-type varint)
• Per-connection owner override via connection_handler callback for multi-tenant servers
• Per-stream handler registration to redirect body data to worker pids
• CLI tools: bin/quic_h3c (client), bin/quic_h3d (server)
• See docs/HTTP3.md for the full guide

Distributed Erlang over QUIC (quic_dist)

• EPMD-less node discovery (quic_discovery_static, quic_discovery_dns)
• Session-ticket cache for 0-RTT reconnection
• User-accessible streams API on top of dist connections
• Stream prioritization (control vs data) and connection-level backpressure
• See docs/QUIC_DIST.md for setup

Requirements

• Erlang/OTP 26.0 or later
• rebar3

Installation

Add to your rebar.config dependencies:

{deps, [
    {quic, {git, "https://github.com/benoitc/erlang_quic.git", {branch, "main"}}}
]}.

Quick Start

Client

%% Connect to a QUIC server
{ok, ConnRef} = quic:connect(<<"example.com">>, 443, #{
    alpn => [<<"h3">>],
    verify => false
}, self()),

%% Wait for connection
receive
    {quic, ConnRef, {connected, Info}} ->
        io:format("Connected: ~p~n", [Info])
end,

%% Open a bidirectional stream
{ok, StreamId} = quic:open_stream(ConnRef),

%% Send data on the stream
ok = quic:send_data(ConnRef, StreamId, <<"Hello, QUIC!">>, true),

%% Receive data
receive
    {quic, ConnRef, {stream_data, StreamId, Data, _Fin}} ->
        io:format("Received: ~p~n", [Data])
end,

%% Close connection
quic:close(ConnRef, normal).

Server

%% Load certificate and key
{ok, CertDer} = file:read_file("server.crt"),
{ok, KeyDer} = file:read_file("server.key"),

%% Start a named server (recommended)
{ok, _Pid} = quic:start_server(my_server, 4433, #{
    cert => CertDer,
    key => KeyDer,
    alpn => [<<"h3">>]
}),

%% Get the port (useful if 0 was specified for ephemeral port)
{ok, Port} = quic:get_server_port(my_server),
io:format("Listening on port ~p~n", [Port]),

%% Incoming connections are handled automatically
%% The server spawns quic_connection processes for each client

%% Stop the server when done
quic:stop_server(my_server).

Alternatively, use the low-level listener API directly:

{ok, Listener} = quic_listener:start_link(4433, #{
    cert => CertDer,
    key => KeyDer,
    alpn => [<<"h3">>]
}),
Port = quic_listener:get_port(Listener).

HTTP/3

%% Server
{ok, _} = quic_h3:start_server(my_h3, 4433, #{
    cert => CertDer,
    key => KeyDer,
    handler => fun(Conn, StreamId, <<"GET">>, Path, _Headers) ->
        Body = <<"hello from ", Path/binary>>,
        quic_h3:send_response(Conn, StreamId, 200,
                              [{<<"content-type">>, <<"text/plain">>}]),
        quic_h3:send_data(Conn, StreamId, Body, true)
    end
}).

%% Client
{ok, H3} = quic_h3:connect("example.com", 4433, #{verify => false, sync => true}),
{ok, StreamId} = quic_h3:request(H3, [
    {<<":method">>, <<"GET">>},
    {<<":scheme">>, <<"https">>},
    {<<":path">>, <<"/hi">>},
    {<<":authority">>, <<"example.com">>}
]),
receive
    {quic_h3, H3, {response, StreamId, 200, _Headers}} -> ok
end,
receive
    {quic_h3, H3, {data, StreamId, Body, true}} ->
        io:format("got ~p~n", [Body])
end,
quic_h3:close(H3).

See docs/HTTP3.md for datagrams, push, priorities, extended CONNECT, extension streams, and per-connection owners.

Messages

The owner process receives messages in the format {quic, ConnRef, Event}:

Event	Description
{connected, Info}	Connection established
{stream_opened, StreamId}	New stream opened by peer
{stream_data, StreamId, Data, Fin}	Data received on stream
{stream_reset, StreamId, ErrorCode}	Stream reset by peer
{closed, Reason}	Connection closed
{transport_error, Code, Reason}	Transport error
{session_ticket, Ticket}	Session ticket for 0-RTT resumption
{datagram, Data}	Datagram received (RFC 9221)
{stop_sending, StreamId, ErrorCode}	Stop sending requested by peer
{send_ready, StreamId}	Stream ready for writing

API Reference

See docs/features.md for the complete API reference and feature list.

Quick Reference

Connection: quic:connect/4, quic:close/2, quic:peername/1, quic:migrate/1

Streams: quic:open_stream/1, quic:send_data/4, quic:reset_stream/3

Server: quic:start_server/3, quic:stop_server/1, quic:get_server_port/1

Datagrams: quic:send_datagram/2 (RFC 9221)

HTTP/3: quic_h3:connect/3, quic_h3:request/2,3, quic_h3:send_response/4, quic_h3:send_data/3,4, quic_h3:start_server/3, quic_h3:open_bidi_stream/1,2, quic_h3:send_datagram/3 (RFC 9114 / 9204 / 9297)

Load Balancer: quic_lb:new_config/1, quic_lb:generate_cid/1 (RFC 9312)

Building

rebar3 compile

Formatting

rebar3 fmt

Static analysis tools

rebar3 lint
rebar3 xref
rebar3 dialyzer

Testing

# Run unit tests
rebar3 eunit

# Run property-based tests
rebar3 proper

# Run all tests
rebar3 eunit && rebar3 proper

Interoperability

This implementation passes all 10 QUIC Interop Runner test cases. See docs/features.md for the full test matrix and interop/README.md for details on running interop tests.

Documentation

Generate documentation with:

rebar3 ex_doc

License

Apache License 2.0

Author

Benoit Chesneau