WSLED_Mini

ESP8266 based WLED Controller with Power Management.

This development board utilizes the ESP8266 to control 5V or 12V addressable LED strips.

Hardware

Schematic

PCB Layout

Building Instructions

1. Re-Make the project and create the Gerber files and upload them to a PCB (printed circuit board) manufacturer of your choice (e.g., JLCPCB). They will use these files to create the circuit board for your device and send it to you.
2. Once you have the PCB, you can start soldering the components onto it. Use the BOM (bill of materials) and schematic as a guide to make sure everything is connected correctly.
3. Upload the firmware by following the instructions in the section after next (see below).

Compiling and Uploading Firmware

This project is designed to be used in conjunction with WLED. Please refer to the instructions provided to program the ESP8266.