FIXED: OSD elements disappear several seconds after changing an element

[Bookmdanno]

At the risk of sounding stupid, I thought I'd post this in case it might possibly help another iNAV-challenged pilot. This is pretty much VTX and iNAV version, as well as FC and TX agnostic. I've used iNAV and DJI O3 & O4 cameras/air units for a long time and never had too much trouble. But after updating to iNAV 9.1.0 a couple days ago, I could only get the OSD elements to remain displayed for around 8 to 12 seconds. The only thing that would stay was the System Messages. After failing to find the cause, I decided, as I often do these days, to ask a couple different AIs what the root cause might be. Well, they had me going on wild goose chases for quite awhile as they hallucinated on whatever crack they were smoking. When I finally engaged my own neurons, I found that the OSD Alt 1 page I had selected via the TX, which I had previously set up and brought over from iNAV 8.x via a diff -all, had been erased. But the default page somehow still had all my settings but my TX was set up so that I could only select OSD OFF or the Alt 1 page. So when an element on the default page in the iNAV Configurator is turned on or off, apparently iNAV displays that page for several seconds and then reverts to the page the TX is selecting. Again, this may seem totally obvious to most and they'd have guessed what was going on immediately but for those slow folks like me, maybe this will help save a few hours of frustration. Happy Flying ...