Skip to content

Update jtag_debug_user_guide #46

New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

Sign up for GitHub

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Open
lz-bro wants to merge 1 commit into
base: main
Choose a base branch
from
Open

Update jtag_debug_user_guide #46

Show file tree
Hide file tree
Changes from all commits
Commits
Show all changes
1 commit
Select commit
File filter

Filter by extension

Filter by extension
Conversations
Failed to load comments.
Loading
Jump to
Jump to file
Failed to load files.
Loading
Diff view
Diff view
2 changes: 1 addition & 1 deletion en/user_guide/jtag_debug_user_guide.md
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -21,7 +21,7 @@ The steps below use **J-Link** as an example.

1. Open the J-Link casing and remove the jumper cap to **disable power output** from J-Link.
2. Connect the JTAG signals and check that the pins are correctly used.
- For K1, refer to the **JTAG Debug Interface** section in the [MUSE Pi User Guide](https://www.spacemit.com/community/document/info?lang=en&nodepath=hardware/eco/k1_muse_pi/pi_user_guide.md).
- For K1, refer to the **JTAG Debug Interface** section in the [K1 MUSE Pi Pro User Guide](https://www.spacemit.com/community/document/info?lang=en&nodepath=hardware/eco/k1_muse_pi_pro/pi_pro_user_guide.md).
- For K3, refer to the **Development & Debugging** section in the [K3 Hardware FAQ](https://www.spacemit.com/community/document/info?lang=en&nodepath=hardware/key_stone/k3/k3_hw/k3_hw_faq.md).

### 2.2 USB Driver Setup
Expand Down
2 changes: 1 addition & 1 deletion zh/user_guide/jtag_debug_user_guide.md
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -16,7 +16,7 @@ K1/K3 系列板子都内置了 JTAG 调试功能，要使其正常工作，需
### 2.1 配置硬件

- **步骤一**：打开 J-Link 的外壳，将其中的跳线帽拔下，使得 J-Link 不对外供电。
- **步骤二**：连接 JTAG 信号，检查引脚是否被使用，K1请参考文档 [MUSE Pi 用户使用指南](https://www.spacemit.com/community/document/info?lang=zh&nodepath=hardware/eco/k1_muse_pi/pi_user_guide.md) 中 **JTAG 调试接口** 信息。
- **步骤二**：连接 JTAG 信号，检查引脚是否被使用，K1请参考文档 [K1 MUSE Pi Pro 用户使用指南](https://www.spacemit.com/community/document/info?lang=zh&nodepath=hardware/eco/k1_muse_pi_pro/pi_pro_user_guide.md) 中 **JTAG 调试接口** 信息。
K3请参考参考文档 [K3 硬件方案 FAQ](https://www.spacemit.com/community/document/info?lang=zh&nodepath=hardware/key_stone/k3/k3_hw/k3_hw_faq.md) 中 **开发调试** 信息。

### 2.2 配置 USB 驱动
Expand Down
Loading