fix: Run response decorators inside interceptor ScopedValue scope

README.md

@@ -577,7 +577,9 @@ OpenApiServer.builder()
 
 Decorators run inside the interceptor's `ScopedValue` binding (the decorator transforms the
 `Response` returned by `next.proceed()`, which is still on the call stack), so
-`CORRELATION_ID.get()` / `TENANT_ID.get()` see the bound values.
+`CORRELATION_ID.get()` / `TENANT_ID.get()` see the bound values. If a decorator throws, the
+exception propagates through any wrapping interceptors before reaching the `ExceptionFilter`, so
+interceptors that catch around `next.proceed()` will observe decorator failures.
 
 A handler in this setup is just business logic:
 

docs/superpowers/plans/2026-05-23-decorator-scoped-value-scope.md

@@ -0,0 +1,375 @@
+# Decorator ScopedValue Scope Fix — Implementation Plan
+
+> **For agentic workers:** REQUIRED SUB-SKILL: Use superpowers:subagent-driven-development (recommended) or superpowers:executing-plans to implement this plan task-by-task. Steps use checkbox (`- [ ]`) syntax for tracking.
+
+**Goal:** Make `ResponseDecorator` instances run inside the `ScopedValue` bindings established by `RequestInterceptor`s, matching the contract documented in `README.md` ("Combining the two").
+
+**Architecture:** Move the decorator loop from `DispatchHandler.handle` into the base case of the recursive `invoke(...)` helper. Decorators then execute after `handler.handle(request)` but *before* control unwinds through the interceptor stack, so every interceptor's `ScopedValue.where(...).call(...)` frame is still live when a decorator runs. A side effect is that interceptors observe the *decorated* Response on the way back up — explicitly endorsed by the README.
+
+**Tech Stack:** Java 25, JDK `com.sun.net.httpserver.HttpServer`, JUnit 5, AssertJ, Mockito, Maven.
+
+**Spec:** `docs/superpowers/specs/2026-05-23-decorator-scoped-value-scope-design.md`
+
+---
+
+## File Structure
+
+- Modify: `src/main/java/com/retailsvc/http/internal/DispatchHandler.java` — relocate decorator loop.
+- Modify: `src/test/java/com/retailsvc/http/internal/DispatchHandlerTest.java` — three new unit tests pinning the new contract.
+
+No README change. No public API change. No new files.
+
+---
+
+## Task 1: Failing test — decorator sees interceptor-bound ScopedValue
+
+**Files:**
+- Modify: `src/test/java/com/retailsvc/http/internal/DispatchHandlerTest.java`
+
+- [ ] **Step 1: Add imports and a class-level test ScopedValue**
+
+Open `src/test/java/com/retailsvc/http/internal/DispatchHandlerTest.java`. Add the following imports near the existing ones (keep alphabetical order with the rest of the file):
+
+```java
+import com.retailsvc.http.RequestInterceptor;
+import com.retailsvc.http.ResponseDecorator;
+import java.util.concurrent.atomic.AtomicReference;
+```
+
+Add a static field inside the class body, immediately after the class declaration line:
+
+```java
+  private static final ScopedValue<String> CORRELATION_ID = ScopedValue.newInstance();
+```
+
+- [ ] **Step 2: Add a helper that builds a DispatchHandler with interceptors and decorators**
+
+Add this overload of `dispatcher` to the class (place it directly under the existing `dispatcher` method):
+
+```java
+  private static DispatchHandler dispatcher(
+      Map<String, RequestHandler> handlers,
+      List<RequestInterceptor> interceptors,
+      List<ResponseDecorator> decorators) {
+    return new DispatchHandler(handlers, interceptors, decorators, new ResponseRenderer(Map.of()));
+  }
+```
+
+- [ ] **Step 3: Write the failing test**
+
+Append this test method to the class:
+
+```java
+  @Test
+  void decoratorSeesInterceptorBoundScopedValue() throws Exception {
+    RequestHandler ok = req -> Response.status(HTTP_OK);
+    RequestInterceptor bindCid =
+        (request, next) -> ScopedValue.where(CORRELATION_ID, "cid-123").call(next::proceed);
+    ResponseDecorator stampCid =
+        (req, resp) -> resp.withHeader("X-Correlation-Id", CORRELATION_ID.get());
+
+    HttpExchange ex = stubExchange();
+    AtomicReference<Response> rendered = new AtomicReference<>();
+
+    withRequest(
+        "get-x",
+        () -> {
+          dispatcher(Map.of("get-x", ok), List.of(bindCid), List.of(stampCid)).handle(ex);
+          rendered.set((Response) ex.getAttribute(DispatchHandler.RESPONSE_ATTR));
+          return null;
+        });
+
+    assertThat(rendered.get().headers()).containsEntry("X-Correlation-Id", "cid-123");
+  }
+```
+
+- [ ] **Step 4: Wire up `exchange.getAttribute` on the stub**
+
+The stub returned by `stubExchange()` is a Mockito mock and `getAttribute(...)` returns `null` by default. Switch the stub to capture the `setAttribute(...)` call. Replace the existing `stubExchange()` body with:
+
+```java
+  private static HttpExchange stubExchange() {
+    HttpExchange exchange = mock(HttpExchange.class);
+    when(exchange.getResponseHeaders()).thenReturn(new Headers());
+    Map<String, Object> attrs = new HashMap<>();
+    doAnswer(
+            inv -> {
+              attrs.put(inv.getArgument(0), inv.getArgument(1));
+              return null;
+            })
+        .when(exchange)
+        .setAttribute(anyString(), any());
+    when(exchange.getAttribute(anyString())).thenAnswer(inv -> attrs.get(inv.getArgument(0)));
+    return exchange;
+  }
+```
+
+Add the imports the new stub needs (keep alphabetical):
+
+```java
+import static org.mockito.ArgumentMatchers.any;
+import static org.mockito.ArgumentMatchers.anyString;
+import static org.mockito.Mockito.doAnswer;
+import java.util.HashMap;
+```
+
+- [ ] **Step 5: Run the new test and confirm it FAILS for the right reason**
+
+Run:
+
+```bash
+mvn test -Dtest=DispatchHandlerTest#decoratorSeesInterceptorBoundScopedValue
+```
+
+Expected: test fails with `java.util.NoSuchElementException: ScopedValue not bound` thrown from `stampCid` — proves the bug.
+
+If it fails for any other reason (compile error, NPE in the stub, etc.), stop and fix that before continuing — the test must fail *because the bug exists*, not because the test is broken.
+
+- [ ] **Step 6: Commit the failing test**
+
+```bash
+git add src/test/java/com/retailsvc/http/internal/DispatchHandlerTest.java
+git commit -m "test: Decorator should see interceptor-bound ScopedValue"
+```
+
+(Pre-commit will run Google Java Format; let it.)
+
+---
+
+## Task 2: Fix — move decorator loop inside the interceptor scope
+
+**Files:**
+- Modify: `src/main/java/com/retailsvc/http/internal/DispatchHandler.java`
+
+- [ ] **Step 1: Move the decorator loop into `invoke`'s base case**
+
+Open `src/main/java/com/retailsvc/http/internal/DispatchHandler.java`. Replace the current `handle` and `invoke` methods with:
+
+```java
+  @Override
+  public void handle(HttpExchange exchange) throws IOException {
+    Request request = CURRENT.get();
+    RequestHandler handler = handlers.get(request.operationId());
+    Response response = invoke(0, request, handler);
+    exchange.setAttribute(RESPONSE_ATTR, response);
+    renderer.render(exchange, response);
+  }
+
+  private Response invoke(int idx, Request request, RequestHandler handler) {
+    if (idx == interceptors.size()) {
+      Response response = handler.handle(request);
+      for (ResponseDecorator decorator : decorators) {
+        response = decorator.decorate(request, response);
+      }
+      return response;
+    }
+    return interceptors.get(idx).around(request, () -> invoke(idx + 1, request, handler));
+  }
+```
+
+The change: the `for (ResponseDecorator ...)` loop moved from `handle` into the `idx == interceptors.size()` branch of `invoke`. Nothing else in the file changes.
+
+- [ ] **Step 2: Run the previously-failing test and confirm it PASSES**
+
+Run:
+
+```bash
+mvn test -Dtest=DispatchHandlerTest#decoratorSeesInterceptorBoundScopedValue
+```
+
+Expected: PASS.
+
+- [ ] **Step 3: Run the whole `DispatchHandlerTest` class**
+
+Run:
+
+```bash
+mvn test -Dtest=DispatchHandlerTest
+```
+
+Expected: all tests PASS — pre-existing `invokesRegisteredHandler` should still pass; the new test passes.
+
+- [ ] **Step 4: Commit the fix**
+
+```bash
+git add src/main/java/com/retailsvc/http/internal/DispatchHandler.java
+git commit -m "fix: Run response decorators inside interceptor ScopedValue scope"
+```
+
+---
+
+## Task 3: Pin interceptor-observes-decorated-response
+
+**Files:**
+- Modify: `src/test/java/com/retailsvc/http/internal/DispatchHandlerTest.java`
+
+- [ ] **Step 1: Add the test**
+
+Append to the class:
+
+```java
+  @Test
+  void interceptorObservesDecoratedResponse() throws Exception {
+    RequestHandler ok = req -> Response.status(HTTP_OK);
+    AtomicReference<Response> seen = new AtomicReference<>();
+    RequestInterceptor capture =
+        (request, next) -> {
+          Response r = next.proceed();
+          seen.set(r);
+          return r;
+        };
+    ResponseDecorator stamp = (req, resp) -> resp.withHeader("X-Stamped", "yes");
+
+    HttpExchange ex = stubExchange();
+    withRequest(
+        "get-x",
+        () -> {
+          dispatcher(Map.of("get-x", ok), List.of(capture), List.of(stamp)).handle(ex);
+          return null;
+        });
+
+    assertThat(seen.get()).isNotNull();
+    assertThat(seen.get().headers()).containsEntry("X-Stamped", "yes");
+  }
+```
+
+- [ ] **Step 2: Run the test**
+
+```bash
+mvn test -Dtest=DispatchHandlerTest#interceptorObservesDecoratedResponse
+```
+
+Expected: PASS.
+
+- [ ] **Step 3: Commit**
+
+```bash
+git add src/test/java/com/retailsvc/http/internal/DispatchHandlerTest.java
+git commit -m "test: Interceptor observes decorated response"
+```
+
+---
+
+## Task 4: Pin decorator-throw-is-catchable-by-interceptor
+
+Adds `import static java.net.HttpURLConnection.HTTP_INTERNAL_ERROR;` alongside the existing `HTTP_OK` static import (memory: `feedback_http_status_constants` — no magic numbers).
+
+**Files:**
+- Modify: `src/test/java/com/retailsvc/http/internal/DispatchHandlerTest.java`
+
+- [ ] **Step 1: Add the test**
+
+Append to the class:
+
+```java
+  @Test
+  void interceptorCanCatchDecoratorFailure() throws Exception {
+    RequestHandler ok = req -> Response.status(HTTP_OK);
+    AtomicBoolean caught = new AtomicBoolean(false);
+    RequestInterceptor catcher =
+        (request, next) -> {
+          try {
+            return next.proceed();
+          } catch (RuntimeException e) {
+            caught.set(true);
+            return Response.status(HTTP_INTERNAL_ERROR);
+          }
+        };
+    ResponseDecorator boom =
+        (req, resp) -> {
+          throw new IllegalStateException("boom");
+        };
+
+    HttpExchange ex = stubExchange();
+    withRequest(
+        "get-x",
+        () -> {
+          dispatcher(Map.of("get-x", ok), List.of(catcher), List.of(boom)).handle(ex);
+          return null;
+        });
+
+    assertThat(caught.get()).isTrue();
+  }
+```
+
+- [ ] **Step 2: Run the test**
+
+```bash
+mvn test -Dtest=DispatchHandlerTest#interceptorCanCatchDecoratorFailure
+```
+
+Expected: PASS. (Before the Task 2 fix this would have failed because the decorator exception propagated past the already-popped interceptor frame straight to `ExceptionFilter`; after the fix the throw happens *inside* the interceptor's `try`.)
+
+- [ ] **Step 3: Commit**
+
+```bash
+git add src/test/java/com/retailsvc/http/internal/DispatchHandlerTest.java
+git commit -m "test: Interceptor can catch decorator failures"
+```
+
+---
+
+## Task 5: Full verification
+
+**Files:** none (verification only).
+
+- [ ] **Step 1: Run the full unit suite**
+
+```bash
+mvn test
+```
+
+Expected: BUILD SUCCESS, zero failures, zero errors. No flakiness expected — all new tests are synchronous and use the existing `withRequest` ScopedValue harness.
+
+- [ ] **Step 2: Run the integration suite**
+
+```bash
+mvn verify
+```
+
+Expected: BUILD SUCCESS. This runs Failsafe IT tests including `DecoratorAndInterceptorIT`, which exercises the same code path end-to-end through `HttpServer`. Confirms no regression in the existing decorator + interceptor IT.
+
+- [ ] **Step 3: Inspect the JaCoCo report for `DispatchHandler`**
+
+Open `target/site/jacoco/com.retailsvc.http.internal/DispatchHandler.html`. Confirm both branches of `invoke` (`idx == interceptors.size()` and the recursive case) are covered and the new decorator loop inside the base case is exercised. If a branch is uncovered, add a test before continuing.
+
+- [ ] **Step 4: SonarLint pre-push check**
+
+Per project memory `feedback_sonar_pre_push`, analyze every touched file with SonarLint MCP before pushing. The worktree caveat from `feedback_sonarlint_blind_to_worktrees` applies — SonarLint may return `not_found` for files only in the worktree. If so, rely on the CI scan for this branch and continue; do not skip the local check on files that *are* visible.
+
+Run SonarLint MCP against:
+- `src/main/java/com/retailsvc/http/internal/DispatchHandler.java`
+- `src/test/java/com/retailsvc/http/internal/DispatchHandlerTest.java`
+
+Fix any new issues in this branch before pushing.
+
+- [ ] **Step 5: Push and open PR**
+
+```bash
+git push -u origin fix/decorator-scoped-values
+gh pr create --title "fix: Run response decorators inside interceptor ScopedValue scope" --body "$(cat <<'EOF'
+## Summary
+- Move the response-decorator loop into the base case of `DispatchHandler.invoke(...)` so decorators execute inside every `RequestInterceptor`'s `ScopedValue` scope. Honors the contract documented in README "Combining the two".
+- Interceptors observe the decorated `Response` on the way back up the stack.
+- A decorator exception now propagates through the interceptor chain (interceptors can catch it) before reaching `ExceptionFilter`.
+
+Spec: `docs/superpowers/specs/2026-05-23-decorator-scoped-value-scope-design.md`
+
+## Test plan
+- [x] New unit test: decorator reads interceptor-bound `ScopedValue`
+- [x] New unit test: interceptor sees decorator-added header on the returned `Response`
+- [x] New unit test: interceptor `try`/`catch` around `next.proceed()` catches a throwing decorator
+- [x] `mvn verify` passes (including `DecoratorAndInterceptorIT`)
+EOF
+)"
+```
+
+---
+
+## Notes for the implementer
+
+- **Do not touch `RequestPreparationFilter` or `AfterResponseHook`.** The spec explicitly scopes those out. Fixing after-hooks to see interceptor ScopedValues is a separate, larger change with a contract shift.
+- **Do not edit `README.md`.** The README is already correct; this PR brings the implementation into compliance.
+- **Decorator order is preserved.** They still iterate in registration order; that was true before and is still true after the move.
+- **Branch is `fix/decorator-scoped-values`** (already created via worktree).
+- **Commit subjects start with a capital letter after the type prefix** — see memory `feedback_skip_commitlint_in_worktrees`.